User Manual

SpectroLED - USER MANUAL
8
POWERING THE
SRL-10
The SRL-10 can be powered directly from
an AC outlet or by one or two NP-F
style batteries (included).
Using the SRL
_
10 with AC Power
Important! The SRL-10 is a multivoltage
fixture capable of running on 100–240 V,
50/60 Hz. The included cable has a 120 V,
50 Hz (North American) plug. To use this
fixture with other voltages, you must use a
plug adapter (sold separately).
Connect the AC power adapter to the
SRL-10, and then use the power cable to
connect it to an outlet.
Using the SRL
_
10 with Battery Power
The SRL-10 can be powered by one or two
NP-F style batteries.
First, make sure the batteries are fully
charged. Place them in the dual charger,
and plug it into a wall outlet. The indicator
lights will blink sequentially to indicate that
charging is in progress. When the lights
stop blinking and are all constant, the
batteries are fully charged.
The dual charger will also work
with the cigarette lighter charging
cable. Plug the cable into a car’s
cigarette lighter socket and the
dual charger to charge
the batteries.
Note
INSTRUCTIONS