Square Sun BI-COLOR SOFT LED FLOOD USER MANUAL
THANK YOU FOR CHOOSING GENARAY Square Sun™ INTRODUCTION The Genaray Square Sun LED light fixture provides photographers and videographers with ultra-bright yet soft continuous light. This 1024-LED fixture can operate on AC or battery power, and it features flicker-free dimming from 100% to 10% with broad 120-degree coverage. The built-in diffuser and the recessed placement of the LEDs within the fixture contribute to a bright and punchy light that also has a soft wraparound quality.
PRECAUTIONS · Keep this unit away from water and any flammable gases or liquids. · Make sure the unit is powered off when plugging it into a power source. · Use only the correct, recommended voltage. · Handle the unit with care. · Do not attempt to disassemble or repair the equipment—doing so will void the warranty, and Genaray will not be responsible for any damage. Precautions · Please read and follow these instructions, and keep this manual in a safe place.
Barndoors Barndoor locking tabs PRODUCT OVERVIEW LED array / Soft panel Yoke Locking knob 4 Square Sun Bi-Color Soft LED Flood - USER MANUAL
Gel clips Battery status indicator Product Overview D-tap output power socket Battery plate V-mount release button Tilt adjustment knob Dimmer/DMX knob Fan Power switch Fan on/off switch Color temperature knob LCD screen 4-pin XLR power socket DMX address DMX output socket Color temperature DMX input socket Brightness Square Sun Bi-Color Soft LED Flood - USER MANUAL 5
CONTENTS INCLUDE · LED with yoke · AC adapter Contents · DMX cable · Power cord · Barndoors 6 Square Sun Bi-Color Soft LED Flood - USER MANUAL MOUNTING THE SS-12V2 Mount the SS-12V2 on any heavy-duty light stand with a 5/8-inch baby-pin stud, and turn the locking knob until secure. Remove the locking knob to mount the SS-12V2 into a 11⁄8-inch junior pin receiver.
The SS-12V2 can be powered directly from an AC outlet or by a V-mount battery (not included). To remove the AC adapter, press the V-mount release button, and slide the adapter off of the V-mount. USING THE SS-12V2 WITH AC POWER USING THE SS-12V2 WITH BATTERY POWER Important The SS-12V2 is a multivoltage fixture capable of running on 100–240 V, 50/60 Hz. The included cable has a 120 V, 50 Hz (North American) plug. To use this fixture with other voltages, you must use a plug adapter (sold separately).
OPERATING THE SS-12V2 The battery status indicator on the rear panel displays the remaining battery power. Instructions 8 4 lights (green) 80 to 100% 3 lights (green) 50 to 80% 2 lights (green) 30 to 50% 1 light (green) 10 to 30% 1 light (orange) Less than 10% (the light will not operate) Square Sun Bi-Color Soft LED Flood - USER MANUAL USING THE BARNDOORS To attach the barndoors, place the barndoor frame on the two lower locking tabs.
USING DMX Open the barndoors, and power the SS-12V2 on. The LCD screen will show the last setting that was used. After powering on the SS-12V2, set the brightness and color temperature by rotating the knobs on the back of the fixture. · Color temperature can be adjusted from 3200 to 5600 K in 100 K increments. · Brightness can be adjusted from 100% to 10% in 1% increments. For quieter operation, turn the fan off via the fan on/off switch.
PRODUCT SPECIFICATIONS LED count: 1024 Specifications Color temperature: 3200 (±150) to 5600 K (±300 K) Luminance: 2565 lx @ 1 m Coverage: 120° CRI: 96 TLCI: 96 Output power: 100 W 10 Square Sun Bi-Color Soft LED Flood - USER MANUAL Working voltage: AC: 100–240 V DC: 12–17 V Mount: 5/8 in. baby pin convertible to 11⁄8 in. junior pin Dimensions: Light only: 14.8 × 14.8 × 3.3 in. (37.7 × 37.7 × 8.5 cm) With yoke: 17 × 21.9 × 3.3 in. (43.3 × 55.7 × 8.
ONE-YEAR LIMITED WARRANTY This Genaray product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
GG1
