User Manual

Square Sun Bi-Color Soft LED Flood - USER MANUAL
7
The SS-12V2 can be powered
directly from an AC outlet or by a
V-mount battery (not included).
USING THE SS-12V2 WITH AC POWER
Important
The SS-12V2 is a multivoltage fixture
capable of running on 100–240 V,
50/60 Hz. The included cable has a 120 V,
50 Hz (North American) plug. To use this
fixture with other voltages, you must
use a plug adapter (sold separately).
Connect the AC power adapter to the
SS-12V2 with the 4-pin XLR cable, and
plug the power cable into an outlet.
The AC adapter comes in a mounting
frame that fits into the V-mount. Align
the adapter with the V-mount, and
slide it into the mount until it clicks.
To remove the AC adapter, press the
V-mount release button, and slide
the adapter off of the V-mount.
USING THE SS-12V2 WITH
BATTERY POWER
The SS-12V2 is powered by
a V-mount battery.
When attaching the battery, make sure the
power switch is in the Off position, and the
fixture is not plugged into a wall outlet.
A three-stud battery can be used
by connecting it to an adapter
plate (sold separately).
POWERING THE SS-12V2
instructions