032C Smart Active Monitor Operating Manual
Introduction Congratulations and a thank you for the purchase of this Genelec Smart Active Monitor™ (SAM™) system. This manual addresses the stand-alone setup and use of the 1032C SAM monitor. This monitors can also be set up and used with the Genelec Loudspeaker Manager GLM™ and the proprietary Genelec monitor control network and software, offering much more versatile acoustic settings and features. Use with the GLM™ is described in the GLM™ System Operating Manual.
MICROPHONE PLACED IN THE LISTENING POSITION COMPUTER RUNNING GLM SOFTWARE 292-0063 GLM ADAPTER GLM TERMINATOR USB CABLE SUBWOOFER GLM NETWORK CABLE MONITORS ON ON ON Figure 1. GLM control network cabling TONE CONTROLS SMART ACTIVE MONITOR SENSITIVITY ADJUSTMENT ON Figure 3. Connector panel detail. -4 -2 800 4k 20k Frequency (Hz) MAINS INPUT 50 / 60 Hz 200 W 100 - 240 V~ 1032C MAGNETICALLY SHIELDED MADE IN FINLAND www.genelec.
Figure 4. The location of the acoustic axis. Figure 5. Symmetrical layout and keeping the acoustic axis clear from obstructions minimizes reflection surfaces and maintains accurate localisation because reflections are symmetrical.
Colour Indication Solid greed Normal state, normal operation Blinking green GLM is adjusting the monitor Green blink every 10 sec. Monitor is an ISS power saving sleep state Red blink Power amplifier overload protection is active (audio is modified because of protection) Solid red Monitor is muted Yellow Monitor is not in the active (playing) group Yellow blinking Overheat protection is active (audio is modified because of protection) Table 2.
1 Mar 17 Genelec Oy 1032C dB SPL dB SPL Genelec Oy 1032C 90 DESKTOP 85 2 Mar 17 95 90 0° 15° 85 80 90 30° 80 TREBLE TILT BASS TILT 85 75 80 70 45° 60° 100 90 BASS ROLL-OFF 85 dB SWL 95 80 20 50 100 200 500 1k 2k 5k 20k 10k Frequency Hz 90 85 20 50 100 200 500 1k 5k 2k 20k 10k Frequency Hz Figure 6. The curves above show the effect of the “Bass Tilt”, “Treble Tilt”, “Desktop Low Frequency” and “Bass Roll-Off” controls on the free field response of the 1032C.
SYSTEM SPECIFICATIONS 1032C Lower cut-off frequency, –6 dB < 33 Hz Upper cut-off frequency, –6 dB > 23 kHz Accuracy of frequency response, ± 2.
www.genelec.com Genelec Document D0144R001 Copyright Genelec Oy 3.2017. All data subject to change without prior notice. International enquiries: In the U.S. please contact: In Sweden please contact: In China please contact: Genelec, Olvitie 5 Genelec, Inc., 7 Tech Circle Genelec Sverige Beijing Genelec Audio Co.Ltd FIN-74100, Iisalmi, Finland Natick, MA 01760, USA Ellipsvägen 10B Phone +358 17 83881 Phone +1 508 652 0900 P.O.