8030A Operating Manual Genelec 8030A Active Monitoring System
8030A Active Monitoring System General description chain. The volume controls on the “slave” Always start adjustment by setting all loudspeakers should be set fully clockwise. switches to “OFF” position.
Figure 1: Location of the acoustic axis and front panel controls Figure 3: Control and connector layout on the rear panel of an 8030A.
8030A Operating Manual Figure 4: The curves above show the effect of the ‘treble tilt’, ‘bass tilt’ and ‘bass roll-off’ controls on the free field response. system specifications crossover Section Lower cut-off frequency, –3 dB: < 55 Hz Upper cut-off frequency, –3 dB: > 21 kHz Free field frequency response of system: 58 Hz – 20 kHz (± 2.0 dB) Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz: > 100 dB SPL @ 1m > 106 dB SPL @ 0.
