User's Manual

English 7
8320 8330
Frequency range –6 dB: 55 Hz – 23 kHz 45 Hz – 23 kHz
Accuracy of frequency response: ±1.5 dB (66 Hz – 20 kHz) ±1.5 dB (58 Hz – 20 kHz)
Maximum short term sine wave acoustic output on axis in
half space, averaged from 100 Hz to 3 kHz:
> 100 dB SPL > 104 dB SPL
Maximum long term RMS acoustic output in same conditions
with IEC weighted noise (limited by driver unit protection
circuit):
> 94 dB SPL > 96 dB SPL
Maximum peak acoustic output per pair, at 1 m distance with
music material:
> 107 dB > 110 dB
Self generated noise level in free field on axis: < 5 dB (A-weighted)
Harmonic distortion at 85 dB SPL on axis: 50…200 Hz < 3 %
>200 Hz < 0.5 %
50…100 Hz < 2 %
>100 Hz < 0.5 %
Drivers:
Woofer
Tweeter
105 mm (4 in) cone
19 mm (
3
/
4
in) metal dome
130 mm (5 in) cone
19 mm (
3
/
4
in) metal dome
Weight: 3.2 kg (7.0 lb) 5.5 kg (12.1 lb)
Dimensions:
Height including Iso-Pod™ table stand
Height without Iso-Pod™ table stand
Width
Depth
242 mm (9
1
/
2
in)
230 mm (9
1
/
16
in)
151 mm (6 in)
142 mm (5
5
/
8
in)
299 mm (11
13
/
16
in)
285 mm (11
1
/
4
in)
189 mm (7
7
/
16
in)
178 mm (7 in)
Bass amplifier short term output power
Treble amplifier short term output power
50 W
50 W
Total harmonic distortion at nominal output <0.05%
Mains voltage 100-240 VAC, 50-60 Hz
Power consumption (ISS active / idle / maximum) < 0.5 W / 3.0 W / 50 W
Digital AES/EBU audio signal connectors (Single wire) n/a XLR female IN
XLR male OUT
Input word length n/a 16 - 24 bits
Input sampling rate n/a 32 - 192 kHz
Crossover frequency 2.9 kHz
Analog input (load impedance) XLR female (10 kOhm, balanced)
Analog input level for 100 dB SPL output at 1 meter -6 dBu (adjustable in GLM software)
Maximum analog input 24 dBu
GLM Control network connectors 2 x RJ45
SYSTEM SPECIFICATIONS
AMPLIFIER SECTION
INPUT SECTION