User Manual

Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual page 12 of 52
reproduced have to be selected on each monitor. The figure below also shows the dip switches
position for the required A or B channel selection.
Connect the following XLR digital audio cables:
 from the AES/EBU output of the audio source to the subwoofer DIGITAL INPUT1 input
connector
 from the subwoofer DIGITAL OUTPUT to the right monitor DIGITAL IN
 from the right monitor DIGITAL OUT to left monitor DIGITAL IN
Select the following digital audio channels for the monitor:
 on the left monitor turn ON digital audio channel A
 on the right monitor turn ON digital audio channel B
Figure 7. An example of an AES/EBU digital audio stereo cabling with SE7261 and digital channel
selections for each monitor.
Digital Audio 5.1 with a SE7261 Subwoofer Example
Before cabling, turn off the power in all monitors and subwoofers. An example of the audio cabling
for AES/EBU digital audio is shown in Figure 8.
Connect the following XLR digital audio cables: