User Manual

Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual page 21 of 52
To calibrate a monitoring group
 connect the calibration microphone to the GLM adapter
 place the microphone at the listening position, at ear height
 click the calibration microphone icon to start a measurement
 wait while AutoCal measures all monitors and subwoofers and then optimizes each monitor
and subwoofer
 click ‘Confirm Calibration’ to accept the settings and save them
 if there is a subwoofer in the group, the next step of the process is the automatic calibration
of the phase (AutoPhase)
See section Advanced use of AutoCal for more detailed information on the calibration process.
Figure 16. Steps in running the AutoCal automatic system calibration process