User Manual

Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual page 28 of 52
Access to Monitor and Subwoofer Settings
Access to monitor and subwoofer acoustical calibration and settings is available by double-clicking
on the monitor and subwoofer icons from the GLM Main page. You can also use the ‘Group’
system menu items to access monitor and subwoofer acoustical settings.
The rapid way to open simultaneously windows to show all the acoustical settings in a system is
available in the menu item ‘Group | Edit Acoustics All’. This can give a rapid overview to
understand the corrections and alignments done in the current group. For a large system, opening
all the windows will take few seconds.
Access to GLM Adapter Information
Access to GLM Adapter information is available by double-clicking on the adapter icon from the
GLM Main page.
Rerunning AutoCal Automatic Calibration
A quick access to rerun AutoCal automatic calibration is available by double clicking on the
microphone icon. This brings up the AutoCal window and starts the calibration process again.
You can rerun the AutoCal automatic calibration
 to ensure the calibration is still valid
 when there have been significant structural changes in the room (tables or other furniture
have been moved or there has been structural changes to the walls, ceiling, or floor)
 when the listening position has changed
 when the locations of items close to the monitors or close to the listening position have
changed
It is usually a good idea to take a copy of the current setup file and perform the recalibration in the
copy instead of doing it the original setup file. This retains both and enables evaluation of the
recalibration outcome. You can take a copy of your setup file with the ‘File | Save as…’ menu
command.
Group Settings, Advanced Use
A SAM group is the set of monitors and subwoofers reproducing the audio presentation together.
Groups are presented as tabbed pages in the GLM main window. You can start using a group
simply by clicking on the group tab. This brings the tab to the top and sends all the settings for this
group to all monitors and subwoofers included in the group.