User Manual

Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual page 32 of 52
Group setting specific to a single monitor (83xx Series)
This section explains the group-specific controls available for monitors.
Table 3. Group settings for monitors (83xx Series)
Setting
Description
View
Monitor Name
Name that helps you identify this monitor
In Group
When the setting is ON this monitor belongs
to the current group. When the setting is OFF
this monitor is not in the group and will not
play audio.
Bass Management
Filter (frequency)
This monitor applies the bass management
crossover frequency (global) or a customized
crossover frequency (individual).
When ‘Bass Management Bypass’ is active,
subwoofer frequencies are reproduced by the
monitors.
Bass Management
setting is (individual or
global)
When ‘global’ is selected all monitors and
subwoofers follow the same settings for bass
management. This is the default setting and
the normal method of using bass
management.
When ‘individual’ is selected, every monitor
and subwoofer can be individually set to the
desired bass management settings. These
settings can be different for every monitor
and subwoofer. This is only recommended
for special acoustic requirements and is not
typically used.