User Manual

Genelec Loudspeaker Manager (GLM) 2.0 - System Operating Manual page 40 of 52
 reposition the measurement microphone to the primary listening position
 review the result by clicking on the monitor and subwoofer icons
 continue to AutoPhase when there is a subwoofer in the system
 accept the calibration result with the ‘Confirm Calibration’ button
Figure 22. Microphone layout for multipoint calibration
Reviewing the AutoCal result
After the AutoCal measurement and calculation process has completed, you can review and
evaluate the resulting frequency response compensations. A miniature system layout is shown
under the frequency response graph. Click on each monitor and subwoofer to review the
measurements, corrections, and compensated responses in the graph window.
SAM
Sweep