Install Manual

Table Of Contents

ii Installation Guidelines for 60 Hz Air-Cooled Generators

Use this page to record important information about this generator.

Record the information found on the unit data label on this

page. For location of the unit data label, see owner’s

manual. The unit has a label plate affixed to the inside

partition, to the left of the control panel console.

Always supply the complete model and serial numbers of the

unit when contacting an Independent Authorized Service

Dealer (IASD) about parts and service.

Operation and Maintenance: Correct maintenance and

care of the generator ensures a minimum number of prob-

lems and keeps operating expenses at a minimum. It is the

operator’s responsibility to perform all safety checks, to ver-

ify all maintenance for safe operation is performed promptly,

and to have the equipment inspected periodically by an

IASD. Normal maintenance, service, and replacement of

parts are the responsibility of the owner/operator and are not

considered defects in materials or workmanship within the

terms of the warranty. Individual operating habits and usage

may contribute to the need for additional maintenance or ser-

vice.

When the generator requires servicing or repairs, Generac

recommends contacting an IASD for assistance. Authorized

service technicians are factory-trained and are capable of

handling all service needs. To locate the nearest IASD,

please visit the dealer locator at:

www.generac.com/Service/DealerLocator/.

Model:

Serial:

Prod Date Week:

Volts:

LPV Amps:

NG Amps:

Hz:

Phase:

Controller P/N:

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM