Owner's Manual

10 Owner’s Manual for Power Zone Connectivity Server
Installation and Operation
Screen Layout
See Figure 3-5. The screen is divided into the Top
Banner (A), the Bottom Banner (B), and the main
screen information area in the center (C). The top and
bottom banners are displayed on every screen.
Figure 3-5. Screen Layout
Top Banner
Figure 3-6. Top Banner Features
(A) Keyswitch Status
A red LED indicates the key is in the OFF position. A
green LED indicates the key is in the AUTOMATIC
position. An orange LED indicates the key is in the
MANUAL position.
(B) Communications Health
A blinking green LED indicates the Main Controller is
responding to Modbus requests. A blinking red LED
indicates the Main Controller is not responding to
requests.
(C) Generator Name
Displays the name of the generator. The user can give
the generator an easy to understand name such as
“East”, “West” or “Number 1”. See Figure 3-7. To name
the generator, go to Setup ĺ Communications ĺ Device
Manager screen, press the Edit button (A) and enter the
Friendly Name.
Figure 3-7. Edit Generator Name
(D) Run Hours
Displays the total number of hours the generator has
been run.
A
C
B
007514
A B C
D
007516
010393
A