Owner's Manual

12 Owner’s Manual for Power Zone Connectivity Server
Installation and Operation
Home Screen Bargraphs
See Figure 3-9. The center of the screen contains data in
the form of bargraphs. The bargraphs contain markers
(A) that represent the trigger points for alarms and
warnings. The markers are white lines. The color of the
bar changes to yellow once the measurement triggers a
warning (either high or low). The color of the bar changes
to red once the measurement triggers an alarm. If a
measured value exceeds the bargraph range, the
bargraph is outlined in red.
Figure 3-9. Bargraph
Alarm Ribbon
See Figure 3-10. This area is hidden when there are no
alarms or warnings. If an alarm or warning condition
occurs, a “Ribbon” will be drawn across the lower portion
of the screen showing the condition. Select the icon that
appears to initiate a different action for each icon, as
shown below.
NOTE: The "Check Engine" icon is displayed only for
emissions related Diagnostic Trouble Codes (DTCs).
Normally, these DTCs cannot be cleared manually. They
will clear when the system has met the required
conditions for the required length of time or number of
run cycles.
Figure 3-10. Alarm Ribbon
Screen Features
Scrolling
See Figure 3-11. Use a mouse to move the scroll bars.
Figure 3-11. Scroll Bar at Edge of Screen
Language
See Figure 3-12. The screen is designed to be multi-
lingual. Each remote user can have a different language
displayed without affecting the other remote users or the
Main Controller Built-in Display. To set the language, go
to the (E) Setup icon, choose “User” ĺ “Language/
Locale”. A drop down box for languages will appear on
the right hand side. Select “Apply Changes” to save the
language selection.
IIcon Description
Alarm (Red): Displays the Alarms and
Warnings Screen
Warning (Yellow): Displays the Alarms and
Warnings Screen
Alarm Horn Active: Silences the alarm horn
Alarm Horn Silenced: No action
Check Engine: No action
Dealer Information: Displays the dealer
information screen
“Not in Auto” Icon (Red): Displays the
AUTO/OFF/MANUAL screen
%
A
007518
007519
007520