Owner's Manual

ManualsBrandsGenerac Power Systems ManualsElectronicsPower Zone Connectivity Server

32 Owner’s Manual for Power Zone Connectivity Server

Installation and Operation

7. Click “Apply Changes” (H) to place the

Connectivity Server in Hotspot mode with the

settings selected.

Figure 3-69. HotSpot Tab

The Connectivity Server can be in one of three modes

exclusively:

• Off

• Client

• Hotspot

Turn Wi-Fi OFF or ON

1. See Figure 3-70. In either Client or HotSpot tab,

check the “Wi-Fi Enabled” checkbox (A) to turn Wi-

Fi ON and uncheck to turn OFF.

NOTE: Wi-Fi and Bluetooth cannot be enabled at the

same time.

Figure 3-70. Toggle Wi-Fi

Bluetooth Setup

A network connection can be made between the

Connectivity Server and a laptop, tablet, or smartphone

using Bluetooth. The Power Zone Connectivity Server

acts as the host and offers networking service to the

connected device. With this connection, the web browser

on the connected device can be used to view the Power

Zone Application remotely.

The Bluetooth setup consists of three steps:

• Turning on Bluetooth on both devices

• Pairing

• Performing a separate connect action from each

connected device.

Turn Bluetooth OFF or ON

1. To get to the screen shown in Figure 3-71, go to:

Settings ĺ Communications ĺ Ethernet/Wi-Fi/

Bluetooth.

2. Check the “Bluetooth Enabled” checkbox (A) to

enable or disable Bluetooth.

3. Select the “Apply” button (B).

4. Follow the connecting device instructions to turn

Bluetooth ON.

NOTE: Wi-Fi and Bluetooth cannot be enabled at the

same time.

Figure 3-71. Turn OFF/ON and Pair Bluetooth Device

Connect and View Power Zone App on Web

Browser of Connected Device

A user initiated action is required to connect the two

Bluetooth devices. The action consists of executing steps

on the guest device. The Connectivity Server is the host.

Each operating system has different procedures to

establish a network connection between the Connectivity

Server and device. The following procedure is based on

Windows 7 operating system (OS).

1. See Figure 3-72. Locate and select device that

represents the Connectivity Server (A).

007575

007580

010448