Owner's Manual

Owner’s Manual for Power Zone Connectivity Server 35

Installation and Operation

Figure 3-78. Email Screen

Configuring Modbus Pass-through

See Figure 3-79. The Power Zone Connectivity Server

acts as a gateway for external systems to exchange data

with a Power Zone System using Modbus. The

Connectivity Server supports both Modbus TCP and

Modbus RTU over RS-485.

Check the Enable box under Modbus TCP to enable

Modbus TCP access.

Check the Enable box under Modus RTU to enable

Modbus RTU access and configure the RS-485 port to

match your external system’s communication settings. To

configure the RS-485 port, set the slave ID of the

Connectivity Server, select the RS-485 port from the

Serial Port list and set the communication settings Baud

Rate, Stop Bits and Parity.

Figure 3-79. Configure Modbus Pass-through

Tools Menu

See Figure 3-80. The Tools menu displays submenus for

CAN bus diagnostics, diagnostics, trending, PLC

manager, and update firmware.

Figure 3-80. Tools Menu

See Figure 3-81. The Login menu provides access to

secured functionality through a user’s security

credentials.

To login:

1. Enter credentials into the input control labeled

“Enter Credentials”, or click the keyboard icon and

enter credentials.

2. Select “Log in”.

007585

010392

007736