Owner's Manual

Owner’s Manual for Power Zone Connectivity Server 1
Introduction and Safety
Section 1 Introduction and Safety
Introduction
Thank you for purchasing a Generac Power Systems,
Inc. product. This unit has been designed to provide high
performance, efficient operation and years of use when
maintained properly.
The information in this manual is accurate based on
products produced at the time of publication. The manu-
facturer reserves the right to make technical updates,
corrections, and product revisions at any time without
notice.
Read This Manual Thoroughly
If any section of this manual is not understood, contact
the nearest Independent Authorized Service Dealer
(IASD) or Generac Customer Service at 1-888-436-3722
(1-888-GENERAC), or visit www.generac.com for start-
ing, operating, and servicing procedures. The owner is
responsible for correct maintenance and safe use of the
unit.
This manual must be used in conjunction with all other
supporting product documentation supplied with the
product.
SAVE THESE INSTRUCTIONS for future reference. This
manual contains important instructions that must be fol-
lowed during placement, operation, and maintenance of
the unit and its components. Always supply this manual
to any individual that will use this unit, and instruct them
on how to correctly start, operate, and stop the unit in
case of emergency.
IMPORTANT NOTE: Use this manual in conjunction
with the appropriate generator owner’s manual.
NOTE: This device complies with part 15 of the FCC
Rules. Operation is subject to the following two condi-
tions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursu-
ant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm-
ful interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio commu-
nications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case
the user will be required to correct the interference at his
own expense.
NOTE: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your
body. This transmitter must not be co-located or operat-
ing in conjunction with any other antenna or transmitter.
NOTE: This device contains license-exempt transmit-
ter(s)/receiver(s) that comply with Innovation, Science
and Economic Development Canada’s license exempt
RSS(s). Operation is subject to the following two condi-
tions:
• This device may not cause interference.
• This device must accept any interference, including
interference that may cause undesired operation of
the device.
NOTE: This equipment complies with IC RSS-102 radia-
tion exposure limits set forth for an uncontrolled environ-
ment. This equipment should be installed and operated
with minimum distance 20 cm between the radiator and
your body.
Safety Rules
The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The alerts in this
manual, and on tags and decals affixed to the unit, are
not all inclusive. If using a procedure, work method, or
operating technique that the manufacturer does not spe-
cifically recommend, verify that it is safe for others and
does not render the equipment unsafe.
Throughout this publication, and on tags and decals
affixed to the unit, DANGER, WARNING, CAUTION, and
NOTE blocks are used to alert personnel to special
instructions about a particular operation that may be
hazardous if performed incorrectly or carelessly. Observe
them carefully. Alert definitions are as follows:
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.