Use And Care Manual

Owner’s Manual for Stump Grinder 5
General Information and Setup
Section 2: General Information and Setup
Figure 2-1. Features and Controls
A complete specification sheet is included in the
documentation provided with the unit at the time of
purchase. For additional copies, contact Generac
Customer Service at 1-888-436-3722 (1-888-
GENERAC), or www.generac.com.
Emissions
The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment certified to California standards)
requires that this engine/equipment complies with
exhaust and evaporative emissions standards. Locate the
emissions compliance decal on the engine to determine
applicable standards. For emissions warranty information,
reference the included emissions warranty. It is important
to follow the maintenance specifications in the manual to
ensure that the engine complies with the applicable emis-
sions standards for the duration of the product’s life.
005812
006533
L
D
C
A
A Throttle Lever
B Start Key Switch
C Gas Fill
D Oil Drain
E Belt Guard
F Operator Presence Lever
G Brake Lever
H Oil Fill/Check
B
K
I
F
G
H
E
J
I Carbide Teeth
J Starter Cord
K Fuel Shut-Off
L Choke Lever
Stump Grinder Specifications
Tire Size 14.5 in (36.83 cm) pneumatic
Handle Bars (in/cm)
Height adjustable 32 (81.28),
36.5 (92.71), 40 (101.6)
Brake Band w/locking feature
Brake Diameter
4 in (10.6 cm)
Clutch Centrifugal
Clutch Engagement
Speed
1900 RPM
Frame
Welded 12 ga steel construction
Belt V-belt
Belt Size (in/cm)
AP47: 49.8 (126.49) OD,
47.3 (120.14) ID
Belt Construction Wrapped for abrasion resistance
Cutting Head Rotary 8 tooth
Cutting Head Size w/
teeth (in/cm)
1.75 (4.44) wide X 10.5 (26.67)
diameter
Cutting Teeth
Replaceable carbide tipped
(three position)
Machine Dimensions
W X L X H (in/cm)
28 (72.12) X 51 (129.54) X
36 (91.44)
in center handle position
Weight (lb/kg)
187 (84.82)
Engine Specifications
Engine Generac G-Force
Fuel Tank Capacity 1.72 gal (6.5 L)
Oil Capacity 37 oz (1.1 L)
Oil Type
See chart in
Adding Oil.
Spark Plug TORCH F6RTC or equivalent
Spark Plug Gap .028-.032 in (0.7-0.8 mm)