Use And Care Manual

34 Owner’s Manual for 34 Ton Log Splitter
Maintenance and Troubleshooting
Leaking pump
shaft seal
Broken drive shaft.
Contact an IASD.
Damaged shaft seal.
Engine/pump misalignment. Correct alignment as necessary.
Plugged oil breather. Verify reservoir is properly vented.
Wedge continues
forward when con-
trol handle is
released
Damaged control valve. Contact an IASD.
Control handle
does not return to
neutral when
released from for-
ward position
Hydraulic fluid too cold. Warm up engine.
Hydraulic fluid too thick.
Replace hydraulic fluid with recommended
hydraulic fluid.
Hydraulic fluid contaminated.
Damaged control valve. Contact an IASD.
Symptom Possible Cause Solution