Spec Sheet

Inline Disconnect Switch
Model: APKE00011
Certification Model Reference: RS801
Generac SnapRS are a simple way to satisfy rapid shutdown
compliance for solar + storage systems. Generac SnapRS are
2017/2020 NEC 690.12 compliant, don’t require any extra hardware
to mount, and need no pairing or fussy digital communications.
FEATURES & BENEFITS
• Fast, easy, and simple to install
• One SnapRS device per PV module
• Achieves PVRSS Compliance
• Low cost, high eciency solution
SnapRS™
SYSTEM DESIGN
Snap a Generac SnapRS disconnect device (RS) to the negative
lead (-) of each module in the solar array for simple module-level
rapid shutdown compliance. SnapRS devices isolate array voltage
when a rapid shutdown is initiated at a PWRcell™ Inverter. When
rapid shutdown is initiated, SnapRS units isolate each PV module in
the array, reducing array voltage to <80V in seconds.
Diagram is applicable for most 60 cell PV modules. Modules with higher cell
count may require a dierent arrangement. Contact Generac for more details.
RS
RSRS RS
RSRS RS
RS
PWRcell
Inverter
PV Link