Manual

Figure 8 - Inspect Inlet Screen
.
Attach endof high pressurehoseto baseof spray gun (Figure
11).
Figure 11 - Connect Hose to Spray Gun
.
Connectthe gardenhose (not to exceed50 feet in length)to
the water inlet (Figure9). Tightenby hand.
Figure 9 - Connect Garden Hose
The highpressurestreamof water thatthis equipment
producescancutthroughskinand its underlying
tissues,leadingto seriousinjury,possibleamputation
or death.Spray guntrapshighwater pressure,even
whenengineisstoppedandwater is disconnected,
whichcancauseinjury.
• NEVERconnecthighpressurehoseto lance.
• Keephighpressurehoseconnectedto pumpandspraygunwhile
systemis pressurized.
• Always be certain spray gun, nozzlesand accessoriesare
correctlyattached.
6. Connect high pressure hose to pump (uncoil hose before
connectingto pump or spraygun) (Figure12).
Figure 12- Connect HighPressureHoseto Pump
Riskof eye injury.Spray cansplashback or propel
..>40 objects.
.
• Always wear safety goggles when using this equipment or in
vicinity of equipmentin use.
• Before starting the power washer, be sure you are wearing
adequatesafety goggles.
• NEVERsubstitute safety glassesfor safety goggles.
Connect lance to spray gun (Figure 10). Tighten by hand.
Figure10- Attach Lance
7. Turn ON the water, squeezethe trigger to purge the pump
system of air (Figure13).
,A CAUTION!
,iA The hosecanbe damagedif it comesin contactwith a
hotengineor muffler.