Manual
Figure 13- Squeeze Trigger
* TheWHITENOZZLEis usedfor delicaterinse (lower pressure and
higherflow), for gentlecleaning of cars/trucks, boats, RV's,patio
furniture, lawn equipment,etc. (Figure15).
Figure 15 - Low Pressure Nozzle (White)
HOW TOUSENOZZLES
The quick-connect on the nozzle lance allows you to switch
between different nozzles. Nozzles can be changed while the
power washer is running, once the spray gun trigger is locked
in the safety position. The nozzles vary the pressure and spray
patternas shown.
* For the most effective cleaning, keep the nozzlefrom 8 to 24
inches (20 to 61 cm) awayfrom the surface being cleaned.
* If you getthe nozzletoo close, especiallyusing a highpressure
nozzle,you may damagethe surface being cleaned.
The highpressurestreamof waterthat this equipment
producescancutthroughskinand itsunderlying
tissues,leadingto seriousinjury,possibleamputation
or death. Spray gun trapshighwater pressure,even
whenengine is stoppedand water is disconnected,
whichcancauseinjury.
* NEVERexchangenozzleswithoutthetriggerlockbeingengagedon
the spraygun.
* DONOTtwistnozzleswhilespraying.
Followthese instructions to change nozzles:
1. Pull backthe collar on the quick-connect and pullthe current
nozzle off. Store nozzles in the accessory storage holder
(Figure14).
Figure 14- Nozzles
• TheYELLOWNOZZLEis for generalrinsing (medium pressureand
medium flow), idealfor most all purposecleaning such as home
siding, brickpatios, wood decks, drivewaysand sidewalks,garage
floors, etc. (Figure16).
Figure 16 - Medium Pressure Nozzle (Yellow)
* The REDNOZZLEis for maximum rinsing (higher pressure and
lowerflow); for stubborn or hardto reachsurface such as second
story surfaces, paint removal, oil stains, rust removal or other
stubborn substances (tar,gum, grease,wax, etc.) (Figure17).
,&CAUTION!
,l_ Thistip (Red Nozzle) candamage worksurfacesif it is
too close,or heldin one positionfor an extendedtime.
Figure17- MaximumPressureNozzle(Red)
2. Selectdesired nozzle:
3. Pull back on the collar, insert the new nozzleand releasethe
collar.Tugon the nozzleto make sure it is securely in place.










