Manual

PRODUCTSPECiFiCATiONS
Pressure- (PSI/ BAR) 3000 / 207 3300/ 228 4000 / 276
FlowRate- (GPM/LPM) 2.8/10.6 3.2/12.1 4.0/15.1
WaterSupply Temperature- (°F/ C°) 100 / 38 Max
HoseLength- (Feet/ Meters) 35 / 10.7 50 / 15.2
Nozzles- NumberperUnit 5
LanceLength (Inches/ cm) 20 / 51 33 / 84 33 / 84
Gun Professional
EngineDisplacement- (Cubic Inch/ cc) 12.9 / 212 18.4 / 302 25.6 / 420
SparkPlugType F7RTCor equivalent
SparkPlugGap- (Inches/ mm) 0.028-0.031 / 0.70-0.80
FuelCapacity- (Quarts/ Liters) 3.2 / 3.0 4.9 / 4.63 6.3 / 6.0
EngineOilCapacity- (Oz/ Liters) 20 / 0.6 37 / 1.1 37 / 1.1
Low OilShut Down System Yes
On/ Off Switch Yes
UNPACKING
1. Removethe parts bag, accessories,andinserts includedwith
power washer.
2. Open carton completely by cutting each corner from top to
bottom.
3. Ensureyou haveall included items prior to assembly.
• MainUnit
• HighPressureHose
• SiphonHose& Filter
• SprayGun
• LancewithQuickConnectFitting
• OilBottle
• PartsBag(whichincludesthefollowing):
HoseHookWireformwithScrewsandAllenWrench
Operator'sManual
Owner'sRegistrationCard
BagcontainingColor-codedNozzles
FilterScreen
4. If you are missing any items from your carton, please call
GeneracCustomerService at 1-888-436-3722. When calling
for assistance,pleasehavethe model and serial numberfrom
the data tag available.
5. Fill out and send in registration card. Write Model number,
Serial number & date of purchase in the table located in the
"Whereto FindUs"section.
ASSEMBLY
Readthe entireoperator'smanualbeforeyou attemptto assemble,
or if you have any problems with the assembly of your power
washer,pleasecall GeneracCustomerServiceat 1-888-436-3722.
When calling for assistance, please have the model and serial
numberfrom the data tag available.
1. The handlemay be folded down or locked into position using
the integratedpull pin.
Figure 2 - Attach Handle