Manual

PRODUCTSPECiFiCATiONS
CONSUMER
OutletPressure- (PSI/BAR) 2500/172 j 2700/186 3000/207
FlowRate- (GPM/ LPM) 2.3/7.6 2.7/10.2
Watersupplytemperature- (°F/ C°) 100/38 Max
Hoselength - (Feet/Meters) 25/7.6 25/7.6 30/9.1
ChemicalTank(s)- Numberper unit 0 1 2
ChemicalTank- Capacity(Gal) N/A 0.75 0.75
Nozzles- Numberperunit 3 4 5
LanceLength (Inches/ cm) 20/51
Gun Standard Deluxe
EngineDisplacement- (Cubic Inch/ cc) 11.9/196 12.9/212
SparkPlugType F7RTCor equivalent
SparkPlugGap- (Inches/ mm) 0.028-0.031/0.70-0.80
Capacity- (Quarts/ Liters) 3.8/3.6 1
Fuel 3.2/3.0
OilCapacity- (Oz/ Liters) 20/0.6
Low OilShut Down System Yes
On/OffSwitch Yes
UNPACKING
1. Removethe parts bag, accessories,andinserts includedwith
power washer.
2. Open carton completely by cutting each corner from top to
bottom.
3. Ensureyou haveall included items prior to assembly.
• MainUnit
• HandleAssembly
• HighPressureHose
• SiphonHose& Filter
• SprayGun
• LancewithQuickConnectFitting
• OilBottle
• HoseHookWireform
• PartsBag(whichincludesthefollowing):
ChemicalTankCap with hole if modelis equippedwith a
ChemicalTank
Operator'sManual
Owner'sRegistrationCard
BagcontainingColor-codedNozzles
4. If you are missing any items from your carton, please call
GeneracCustomerService at 1-888-436-3722. When calling
for assistance,pleasehavethe model and serial numberfrom
the data tag available.
5. Fill out and send in registration card. Write Model number,
Serial number & date of purchase in the table located in the
"Whereto FindUs"section.
ASSEMBLY
Readentireoperator'smanualbeforeyou attemptto assembleor If
you have any problems with the assembly of your power washer,
please call GeneracCustomerService at 1-888-436-3722. When
calling for assistance, please have the model and serial number
from the datatag available.
1. Place handle (A) onto handle supports (B). Push in latch
buttons and allow handleto slide into position (C). Buttonwill
lock handleinto place (Figure2).
Figure 2 - Attach Handle