GENPortable Products RAC °] 2100 High Pressure / Washer Owner's Manual Model No. 1536-0 (2,100 PSI High Pressure Washer) Manual No. 187698 Revision I (12/14/2000) Visit our Generac A website: www.generac-portables.com This isall the safety alert symbol.follow It is used alert to youavoid to potential Obey safety messagesthat this to symbol possiblepersonal injury or injury death.hazards.
Generac Portable Products 2,100 PSIHigh Pressure Washer SAFETY EQUIPMENT DESCRIPTION CONGRATULATIONS on your purchase of a GENERAC high pressure washer. It has been designed, engineered and manufactured to give you the best possible dependability and performance. This manual contains information for a high pressure washer that operates at 2,100 PSIat a flow rate of 2.0 gallons per minute.
Generac Portable Products 2,100 PSIHigh Pressure Washer • Operate engine only at governed speed. Running the engine at excessive speeds increasesthe hazard of personal injury. Do Not tamper with parts which may increase or decrease the governed speed. • Never move the machine by pulling on the high pressure hose. Use the handle provided on the unit. • Do Not wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.
Generac Portable Products 2,100PSIHighPressure Washer KNOW YOUR PRESSURE WASHER Read this owner's manual and safety rules before operating your high pressure washer. Compare the illustrationswith your high pressure washer to familiarize yourself with the locationsof various controls and adjustments. Savethis manual for future reference.
Generac Portable Products 2,100PSIHighPressure Washer PREPARING WASHER IMPORTANT: Read entire owner's manual before you attempt to assembleor operate your new pressure washer. REMOVE PRESSURE WASHER FROM CARTON PRESSURE FOR USE If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-270-1408.
Generac Portable Products 2,100PSIHighPressure Washer • Insertthecarriage boltthroughtheholesfromthe outsideoftheunitandattachaplasticknobfromthe insideoftheunit.Tighten byhand(Figure 2). Add Engine Oil IMPORTANT: Any attempt to crank or start the engine before it hasbeen properly servicedwith the recommended oil may result in an enginefailure. • Place pressure washer on a level surface. • Refer to the engine owners manual to add recommended oil to engine.
Generac Portable Products 2,100PSIHighPressure Washer NOTE: Your pressure washer comes with a quick connect that you can use to attach the high pressure hose to either the pump or spray gun. • Uncoil the high pressure hose and attach the female quick connect to one end of the hose. Attach the male quick connect to the high pressure fitting on the pump (Figure 7). • Run water through your garden hose for 30 seconds to clean out any debris. Turn off water. • Connect the garden hose to the water inlet.
Generac Portable Products 2,100 PSIHigh Pressure Washer HOW TO USE YOUR PRESSURE WASH ER • Engagethe safety latch to the spray gun trigger (Figure 12). If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-270-1408. To Start Your Pressure Washer • Move the throttle lever to "Fast" position, shown here as a rabbit (Figure 13). To start your pressure washer for the first time, follow these instructionsstep-by-step.
Generac Portable Products 2,100PSIHighPressure Washer • Returnthestartergriphandle slowly.Do Not let rope • Hang your chemical solution bottle on the "J"hook and place the detergent siphoning filter in the last slot on the left (Figure 15). "snap back" against starter. • When engine starts, slowly move choke lever to the "Run" position. If engine falters, move choke lever to the "Choke" position, then to the "Run" position.
Generac Portable Products 2,100 PSIHigh Pressure Washer • Point the nozzle down towards a firm surface and press the trigger to test the pattern (Figure 17). Applying Detergent with the Adjustable Nozzle _ WARNING! You must attach all hoses before you start the engine. Starting the engine without all the hoses connected and without the water turned ON will damagethe pump. IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could damage the pump.
Generac Portable Products 2,100 PSIHigh Pressure Washer • Make sure the garden hose is connected to the water inlet. Check that the high pressure hose is connected to the spray gun and the pump. Start the engine. • Keep the spray gun a safe distance from the area you plan to spray. • Apply a high pressure spray to a small area, then check the surface for damage. If no damageis found, it is okay to continue cleaning.
Generac Portable Products 2,100 PSIHigh Pressure Washer GENERAL MAINTENANCE RECOMMENDATIONS The pressure have been receive washer full value maintain manual. warranty subjected the does not from to operator washer the operator as instructed To must Pressure Hose in this _i • Some adjustments will need to be made periodically to properly maintain your high pressure washer. • All maintenance in this manual and the engine owner's manual should be made at least once each season.
Generac Portable Products 2,100 PSIHigh Pressure Washer Check In-Line Filter •Putl the trigger on the spray gun and hold. • When the water supply is steady and constant, engage the safety latch. Refer to Figure20 and service the in-linefilter if it becomes clogged, as follows: To remove contaminants from the pump, follow these steps: • Set up the pressure washer as described in "Preparing Pressure Washer For Use". Connect the water supply and turn water on.
Generac Portable Products 2,100PSIHighPressure Washer To remove a worn or damaged o-ring: • Use a small flathead screwdriver o-ring and pry it off. ENGINE See the engine properly _IL Usethewireincluded inthekit(Figure 21)or asmall paperclipto freetheforeignmaterial clogging or restricting thenozzle. • Remove additional debrisbybackflushing waterthrough thenozzle extension (Figure 22).Backflushbetween 30to 60seconds. Turnthenozzleextension to stream sprayandmovethenozzlefromlowto highwhile flushing.
Generac Portable Products 2,100 PSIHigh Pressure Washer TROUBLESHOOTING Problem Correction Cause Pump has following problems: failure to produce pressure, erratic pressure, chattering, loss of pressure, low water volume. Detergent fails to mix with spray. Engine runs good at noload but "bogs" when load is added. I. Nozzle in low pressure mode. I. 2. Water inlet isblocked. 2. Pullnozzle backward for highpressure mode. Clear inlet. 3. 4. 5. 6. 7. 3. 4. 5. Provide adequate water flow.
Generac Portable Products 2,100 PSIHigh Pressure Washer I j/_ EXPLODED I VIEW --- UNIT 24_ 247 \ \ \ \ 1 \ \ \ \ _24 _25 44 _ 27 _ / 16
Generac Portable Products 2,100 PSIHigh Pressure Washer l/! I m PARTS Item I 2 3 4 5 6 7 8 9 10 II 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 LIST--- UNIT Part# Qty. Description NSP ENGINE 187878 HANDLE, Lift 187915 DECAL, Warning/Decal 187916 DECAL, Start Instructions 187799 SCREW, M4.
Generac Portable Products 2,100 PSIHigh Pressure Washer I j/_ EXPLODED --16 I VIEW 1 PUMP 1 L \ _1 5 3 12 27 26 37 24 39 40 0 I 31 30< 35 f 34 36 30 37 _ 32 37 I 18
Generac Portable Products 2,100 PSIHigh Pressure Washer Ill I m PARTS LIST-Item I 2 3 4 5 6 Part# 98300 97962 96795 21429 97835 21783 7 8 9 10 II I 2 5 12 13 14 15 16 17 18 19 20 21 22 28 23 21 24 25 26 27 29 30 31 32 37 93680 97831 B2702 98227 B2310 185287 187879 B3513 Qty.
Lavadora deAltaPreslbn 2,100PSIdeGenerac Portable Products DESCRIPCION INSTRUCCIONES SEGURIDAD DEL EQUlPO DE FELICIDADES en la compra de su lavador a alta presibn GENERAC. Este ha sido dise_ado, fabricado y creado para darle el mayor rendimiento y eficada posible. _haga Este manual contiene informaci6n referente el lavador a alta presibn que funciona a 2,100 psi, a un promedio de flujo de 2.0 galones por minuto.
Lavadora de Alta Presi6n 2,100 PSIde Generac Portable Products Opere el motor 6nicamente a la velocidad de mando. Hacer funcionar el motor a velocidades excesivas aumenta el riesgo de lesiones personales. No juegue con partes que puedan aumentar o disminuir la velocidad de mando. Siempre asegOresede que la pistola de rociado, boquillas y accesorios est_n conectados correctamente. No use ropa suelta, joyas o elementos que puedan quedar atrapados en el arranque o en otras partes rotatorias.
Lavadorade Alta Preslbn 2,100 PSIde Generac Portable Products CONOZCA SU MAQUINA LAVADORA DE ALTA PRESION Lea el manual del propietario y las reglas de seguridad antes de poner en marcha su m_quina lavadora a presi6n. Compare las ilustracionescon su m_quina lavadora a presi6n para familiarizarse con las ubicaciones de los diferentes controles y ajustes, Guarde este manual para referencias futuras.
Lavadora de Alta Presi6n 2,100 PSIde Generac Portable Products PREPARANDO EL LAVADOR A ALTA PRESION PARA SU USO IMPORTANTE: Lea totalmente el manual del propietario antes que intente ensamblar u operar su lavador a alta presi6n. REMUEVA EL LAVADOR ALTA PRESION DEL A Si usted tiene un probiema al ensamblar la unidad o si hacen falta algunas piezas o se encuentran dahadas, Ilame a la linea directa del lavador a alta presi6n, al 1-800-270-1408.
Lavadorade Alta Preslbn 2,100 PSIde Generac Portable Products Inserte el perno del soporte a tray,s de los orificios desde fuera de la unidad y sujete una perilla de pl_stico desde el interior de la misma unidad. Apriete manualmente (Figura 24). Agregar Aceite al Motor IMPORTANTE: Cualquier intento para arancar el motor antes de haberle proporcionado el mantenimiento apropiado con el aceite recomendado, podria ocasionar la falla del motor. Coloque la lavadora a presi6n sobre una superficie nivelada.
Lavadora de Alta Preslbn 2,100 PSIde Generac Portable Products Conecte la Manguera y el Suministro de Agua a la Bomba IMPORTANTE: Usted deber_ armar la extensi6n para boquillas y conectar todas las mangueras antes de darle arranque al motor. La bomba resultar_ dahada si arranca el motor sin tener todas las mangueras conectadas y el suministro agua abierto.
Lavadora de AIta Presi6n 2,100 PSIde Generac Portable Products COMO USAR SU Coloque el pasadorde seguridad al gatillo de la pistola rociadora (Figura 34). MAQUINA LAVADORA A PRESION Si tiene problemas operando su mgquina lavadora a presi6n, por favor Ilame a la linea de ayuda para m_quinas lavadoras a presi6n al 1-800-270-1408. C6mo Darle Arranque Lavadora a Presi6n Mueva el control de la vglvula de admisi6n a la posici6n "Rgpido" ("Fast"), que se distingue con la figura de un conejo (Figura 35).
Lavadora de Alta Presi6n 2,100 PSIde Generac Portable Products Cuando arranque el motor, mueva lentamentela palanca del ahogador a la posici6n "En marcha" ("Run"). Si el motor se enciende, pero no contin6a funcionando, mueva entonces la palanca a la posici6n "Ahogado" ("Choke"), y despu_s a la posici6n "En marcha" ("Run"). Sostenga la botella de su soluci6n forma de "J" y coloque Mueva la palanca de control Apriete eliminar NOTA: adherido al manubrio al lado derecho de la unidad (Figura 37).
Lavadorade Alta Presi6n 2,100 PSIde Generac Portable Products Aplicaci6n del Detergente Boquilla Ajustable ,_ Usando la iADVERTENClA! Usted deber_alconectar todas lasel mangueras antes de darle arranque motor. Arrancar motor sin tener todas las mangueras conectadas y sin el suministro de aguaABIERTO (ON) causar_ el da_o de la bomba. IMPORTANTE: Utilice quimicos dise_ados especificamente para mgquinas lavadoras a presi6n. Los detergentes caseros podriandafiar la bomba.
Lavadora de Atta Presi6n 2,100 PSIde Generac Portable Products Aseg_rese que Ia manguera de jardfn est_ conectada Mantenga la pistola de rociado a una distancia segurDdel _,rea que planea rociar. a la entrada del agua. Revise que la manguera de alta presi6n est_ conectada a la pistola de rociado y a la bomba. Dele arranque al motor. Aplique un rodDdo de alta presi6n en un grea pequefia, despu_s revise si la superficie presenta dafios. Si no encuentra da_os, puede continuar con el trabajo de limpieza.
Lavadorade Alta Preslbn 2,100 PSIde Generac Portable Products RECOMENDACIONES G EN ERALES _ La garanttade la m_quinalavadoraa presibn no cubre los elementos que hart sido sujetosa abuso o negligenciapor parte del operado_ Para hacer valida lacobertura total de lagarantia,el operador deber_ mantener la lavadorade presibn tal y como se indicaen el manual. Chequee el Tubo de Sif6n del Detergente Algunos ajustes tendr_n que hacerse peribdicamente para mantener adecuadamente su mgquina lavadora a presi6n.
Lavadora de Alta Presi6n 2,100 PSIde Generac Portable Products I. Retire la pistola y la extensi6n para boquillas de la manguera de alta presi6n. Retire la extensi6n para boquillas de la pistola y retire el anillo 'o' y el colador de la extensi6n para boquillas. Laveel colador, pistola y extensi6n para boquillas con agua limpia para eliminar toda clase de residuos. 2. Si el colador est_ dafiado, encontrar_ un colador para el filtro en llnea y un anillo 'o' de repuesto en el iuego de anillos 'o'.
Lavadorade Alta Presi6n 2,100 PSIde Generac Portable Products PREPARANDO LA UNIDAD PARA SU ALMACENAMIENTO Vuelva a instalar la boquilla en la extensi6n para boquillas. No la apriete demasiado. Vuelva a conectar el suministro de agua, ABRA el suministro agua y ponga el motor en funcionamiento. Vuelva a conectar la extensi6n para boquillas a la pistola de rociado. El agua no debe permanecer en la unidad por un largo periodo de tiempo.
Lavadora de Alta Preslbn 2,100 PSIde Generac Portable Products NOTAS / 33
Lavadora deAltaPresi6n 2,100PSIdeGenerac Portable Products REPARACION Problema La bomba siguientes DE DAI IOS presenta los problemas: no produce presi6n, produce una presi6n errada, traqueteo, pfardida de presi6n, bajo volumen de agua. Proporcione La manguera de alta presi6n es_ bloqueada o presenta fugas. La pistola presenta fugas. La boquiUa est_ obstruida. Bomba defectuosa. 7. Retire las obstrucciones 8. 9. I 0. El tubo de succi6n de detergente no est_ sumergido.
GARANTiAS LIMITADAS DE LAVADORAS A PRESION Generac Portable Products (que de ahora en adelante se denominarg como la COMPAI_IJA)garantiza al comprador original, que la lavadora de presi6n fabricada pot la COMPAI_I[A est_ libre de cuatquier desperfecto en mano de obra y material por el(os) periodo(s) indicado(s) lineas abajo, a partir de la fecha original de compra. La presente garantia no es transferible. El t_mino "comprador original" designa a la persona que originalmente la adquiri6.
LIMITED PRESSURE WASHER WARRANTY GENERAC PORTABLEPRODUCTS (hereafter referred to as the COMPANY) warrants to the original retail purchaser,the pressure washer manufactured by the COMPANY to be free from defects in material and workmanship for the period(s) set forth below from the date of original purchase. This warranty is not transferable. The term "original purchaser" means the person for whom the pressure washer is originally purchased.