Manual

Generac Portable Products 2,100 PSIHigh PressureWasher
• Point the nozzle down towards a firm surface and press
the trigger to test the pattern (Figure 17).
• Twisting the nozzle adjuststhe spray pattern from a
narrow pattern to a fan pattern (Figure 18).
Twist nozzle clockwise
counterclockwise for fan for narrow spray
• For most effective cleaning, keepthe spray nozzle
between 8 to 24 inches away from cleaning surface.
• If you get the spray nozzle too close, especiallyusing high
pressure mode, you maydamage the surface being
cleaned.
• Do Not get closer than 8 inches when cleaningtires.
Applying Detergent with the
Adjustable Nozzle
_ WARNING! You must attach all hoses before
you start the engine. Starting the engine without all
the hoses connected and without the water turned
ON will damagethe pump.
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump.
To apply detergent, follow these steps:
• Reviewthe useof adjustable nozzles.
• Prepare detergent solution asrequired by the
manufacturer.
• Hangthe detergent solution on the "J" hook attached to
the accessory tray, as shown in Figure 19.
• Placethe small filter end of the detergent siphoning tube
intothe detergent container.
_ AUTION! Keep the detergent siphoning tube
from coming in contact with the hot muffler.
• Slide the adjustable nozzle forward to low pressure
mode. Detergent cannot be applied with the nozzle in
high pressure position.
/
10