Manual

Generac Portable Products 3500 PSIPressureWasher
ASSEMBLY
IMPORTANT: Readentire owner's manualbefore you
attempt to assembleor operate your new pressure washer.
Remove Pressure Washer From
Carton
• Remove the high pressure hose, handle,and parts box
includedwith pressure washer.
• Slice two corners at the end of carton from top to
bottom so the panel can be folded down fiat, then
remove all packing material.
• Roll pressure washer out of carton.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fill out and sendin registration card.
2. Attach handle to main unit.
3. Add oil to engine.
4. Add fuel to fuet tank.
5. Remove and discard tape from domed oil filler cap on
top of pump.
6. Connect high pressure hose to spraygun and pump.
7. Connect water supply to pump.
8. Connect nozzle extension to spray gun.
Carton Contents
9. Select and installdesired quick connect spray tip.
Items in the carton include:
Main Unit
High Pressure Hose
Handle
Accessory Box (includes the following):
(2) Bottles of engine oil
Owner's registration card
Safety goggles
Bagcontaining 5 multi-colored quick connect
spray tips
Maintenance kit
Attach Handle to the Pressure
Washer
Use either a 13ram or adjustable wrench to attach the
handle to the pressure washer.
To attach handle to the pressure washer:
I. Slowly tip pressure washer forward and let it gently
rest on front bumper.
2. Align holes on handle with holes on base.
3. Insert carriage bolts provided to hold handle in place
(Figure I).
Owner's manual
Enginemanual
Enginewarranty card
Emissionscontrol warranty card
Spark arrester screen
Spray gun with quick connect fitting
Nozzle extension with quick connect fitting
Handle hardware, including4 carriage bolts and
4 flange nuts
If any of the above parts are missing or damaged,call the
pressure washer helpline at 1-800-270-1408.
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assemblyof your
pressure washer or if parts are missingor damaged,call the
pressure washer helpline at 1-800-270-1408.
4. Secure handleto pressure washer usingfour provided
flange nuts.
5. Slowly tip pressure washer back in place and insert
multi-colored quick connect spray tips in spaces
provided in handle.
/
6