Manual

Yourgeneratorrequiressomeassemblyandisreadyfor

useafterit hasbeenproperlyservicedwiththe

recommendedoilandfuel.

If you have any problems with the assembly of your

generator, please call the generator helpline at

1-800-270-1408.

IMPORTANT: Any attempt to run the unit before it has

been serviced with the recommended oil will result in an

engine failure.

REMOVE G EN ERATOR

FROM CARTON

• Set the carton on a rigid flat surface with "This Side Up"

arrows pointing upward.

• Carefully open the top flaps of the shipping carton.

• Cut down corners at one end of carton from top to

bottom and lay that side of carton down flat

• Removeall packing material, carton fillers, etc.

• Removethe generator from the shipping carton.

CARTON CONTENTS

Check all contents. If any parts are missing or damaged,call

the generator helpline at 1-800-270-1408.

• The generator

• Generator and engine owner's manuals

• Locking 30Amp plug

• Engineoil

• Wheel kit

INSTALL WHEEL KIT

IMPORTANT:This wheel kit is not intended for

over-the-road use.

To installyour wheel kit you need the followingtools:

• Two 13mm box, openend,or socket wrenches

Install Wheel Kit as follows:

I. Placethe bottom of the generator cradle on a flat,

even surface.Temporarily place uniton blocks to ease

assembly.

2. Slide axle through both axle mounting brackets on

cradle frame, as shown in Figure I.

Hex Nut

FlatWasher

Support Leg

Hex Nut _

Screw

Axle

Wheel

Retaining Pin