SDS

Page 2 of 6
Product Description: MATERIAL SAFETY DATA SHEET
T20086APC-TU6
HSB TAN TEXTURE (SPE - Paint: 1 Oz. or Less)
PMS WARM GRAY 1C
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE:
Asthma and other respiratory ailments.
TARGET ORGANS: Kidney Liver Lung Brain
Reports have associated repeated and prolonged overexposure to solvents with
permanent brain and nervous system damage.
This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
SECTION 4: FIRST AID MEASURES
EYE CONTACT: Immediately flush eyes with water for at least 15 minutes. If
irritation develops get medical attention.
SKIN CONTACT: Remove contaminated clothing and wash before reuse. Wash skin with soap
and water. Get medical attention if irritation develops.
INHALATION: Move to fresh air.
INGESTION: Do NOT induce vomiting. Get medical attention immediately.
SECTION 5: FIRE FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA: CO2 (Carbon Dioxide), dry chemical, or water fog.
UNSUITABLE EXTINGUISHING MEDIA: Water spray may be unsuitable. However, if water is
used, fog nozzles are preferable. Water may be used to cool closed containers
to prevent pressure build-up.
PRODUCTS OF COMBUSTION: These products are carbon oxides (CO,CO2).
PROTECTION OF FIREFIGHTERS: Full protective equipment including self-contained
breathing apparatus should be used.
SECTION 6: ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTIONS: Use personal protection recommended in Section 8.
ENVIRONMENTAL PRECAUTIONS: None known.