Cut Sheet

Nexus ™ Wireless Remote Monitor
No need to go outside during inclement weather to check the generator status. Generac’s
wireless remote gives you instant status updates without ever leaving the house. Available
for use on generators up to 60 kW*. Choose from two option:
Remote Annunciator Options for H-Panel Controller —
Liquid-cooled Units (70–150 kW)
Only compatible with generators using the H-panel.
Surface Mount Remote Annunciator Panel without Relays
An essential addition to a large generator setup, the annunciator panel provides remote
monitoring and annunciation of up to 18 generator parameters using LEDs located on
the annunciator keypad. Also includes two system level warnings:
System Ready
and
Communications OK
.
Indicates:
Surface Mount Remote Annunciator Panel with 8 Relays
Includes all the features of the above panel with the addition of 8 relays that can
be utilized to drive alarms throughout a building.
Surface Mount Remote w/out LED’s and keypad (Relays Only)
Provides 8 relays that can be utilized to drive alarms throughout a building.
Note: All H-Panel models require a 2-wire RS-485 and 12 volt DC supply connection to the generator. No more than two 21-light remote
annunciators can be connected to a single genset. Remote annunciators are compatible with the control panel.
REMOTE MONITORING OPTIONS
ADVANCED
Sleek appearance with flush LED indicator
for smooth contour
control pad
*Remote monitor adapter required for 22 kW to 60 kW.
BASIC
width and height of a credit card
generator status through wireless remote
or battery is low
Advanced
Basic