Spec Sheet

GENERAC
®
ACCESSORIES
Maintenance Kits
Air-Cooled Engines
Model 5661
Model 5662
Model 5663
Model 5664
Model 5665
Model 6003
Model 6004
OIL RECOMMENDATIONS
KIT CONTENTS
DESCRIPTION
Scheduled maintenance is a necessity for all standby generators. The Air
Cooled Scheduled Maintenance kits offer all the hardware necessary to
perform a complete maintenance on Generac air-cooled generators. Oil will
need to be purchased separately based upon the recommendations listed.
Maintenance is recommended at every 200 hours or 2 years. If running in a
dusty environment, more frequent maintenance may be required. Maintenance
intervals may differ per model. Refer to the generator owner's manual for more
information.
Kit Model 5661 5662 5663 5664 5665 6003 6004
Unit Size
7kW
(410cc)
8kW
(410cc)
10kW
(530cc)
12kW
(760cc)
13kW
(992cc)
14kW
(992cc)
16kW
(992cc)
17kW
(992cc)
18kW
(992cc)
20kW
(999cc)
7kW
(420cc)
6kW
(530cc)
Air Filter • • • • • • • • • • • •
Oil Filter • • • • • • • • • • • •
Spark Plug(s) 1 1 2 2 2 2 2 2 2 2 1 2
Spark Plug Wrench • • • • • • • • •
Oil Funnel • • • • • • • • • • • •
Chamois • • • • • • • • • • • •
Reminder Sticker • • • • • • • • • • • •
*Contents of kits may vary
SAE 30
Synthetic 5W-30
10W-30
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2010 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0181730SBY-C / Printed in U.S.A. 09/22/10