Installation Guide

Unpacking and Inspection
8 Installation Guidelines for Air-Cooled Generators
2.3 — Unpacking
1. Remove shipping carton. See Figure 2-1.
2. Inspect top of generator to determine if optional automatic transfer switch is included.
3. If present, carefully disassemble wooden frame and remove automatic transfer switch.
Figure 2-1. Unpack Generator
4. Remove four bolts with crating clamps. Carefully lift the generator off the wooden pallet. Do NOT drag the gener-
ator off the pallet or damage to the base will occur. See Figure 2-2.
Figure 2-2. Remove Crating Clamps
Wooden
Generator
Automatic
Transfer
Switch
Frame
Lid
Front
Crating Clamps (4)
Access Panel
Pallet