Replacement Part List

ManualsBrandsGenerac ManualsAccessories45kw 2.4 l Maintenance Kit

1 of 11

INCLUDES:

• Two-Line LCD Multilingual Digital Evolution™

Controller (English/Spanish/French/Portuguese)

with external viewing window for easy indication of

generator status and breaker position.

• Capability to be installed with 18" (457mm) of a

building*

• True Power™ Electrical Technology

• Isochronous Electronic Governor

• Sound Attenuated Enclosure

• Closed Coolant Recovery System

• Smart Battery Charger

• UV/Ozone Resistant Hoses

• ±1% Voltage Regulation

• Natural Gas or LP Operation

• 5 Year Limited Warranty

• UL 2200 Listed

Note: 25-45 kW units are field convertible between

natural gas or liquid propane. 60 kW units are

built per fuel requirement and are not convertible.

Standby Power Rating

Model RG025 (Aluminum - Bisque) - 25 kW 60 Hz

Model RG030 (Aluminum - Bisque) - 30 kW 60 Hz

Model RG036 (Aluminum - Bisque) - 36 kW 60 Hz

Model RG045 (Aluminum - Bisque) - 45 kW 60 Hz

Model RG060 (Aluminum - Bisque) - 60 kW 60 Hz

PROTECTOR

SERIES

Standby Generators

Liquid-Cooled Gaseous Engine

Protector

Series

Protector

Series

Meets EPA Emission Regulations

25, 30 & 45 kW CA/MA emissions compliant

36 & 60 kW not for sale in CA / MA

¡ INNOVATIVE DESIGN & PROTOTYPE TESTING are key components of

GENERAC’S success in “IMPROVING POWER BY DESIGN.” But it

doesn’t stop there. Total commitment to component testing, reliability

testing, environmental testing, destruction and life testing, plus testing

to applicable CSA, NEMA, EGSA, and other standards, allows you to

choose GENERAC POWER SYSTEMS with the confidence that these

systems will provide superior performance.

¡ TEST CRITERIA:

a PROTOTYPE TESTED a NEMA MG1-22 EVALUATION

a SYSTEM TORSIONAL TESTED a MOTOR STARTING ABILITY

¡ SOLID-STATE, FREQUENCY COMPENSATED VOLTAGE REGULATION.

This state-of-the-art power maximizing regulation system is standard on

all Generac models. It provides optimized FAST RESPONSE to changing

load conditions and MAXIMUM MOTOR STARTING CAPABILITY by

electronically torque-matching the surge loads to the engine. Digital

voltage regulation at ±1%.

¡ SINGLE SOURCE SERVICE RESPONSE from Generac’s extensive dealer

network provides parts and service know-how for the entire unit, from the

engine to the smallest electronic component.

¡ GENERAC TRANSFER SWITCHES. Long life and reliability are

synonymous with GENERAC POWER SYSTEMS. One reason for this

confidence is that the GENERAC product line includes its own transfer

systems and controls for total system compatibility.

FEATURES

*Assembled in the USA using

domestic and foreign parts

ISO

9001:

2008

*Only if located away from doors,

windows, and fresh air intakes, and

unless otherwise directed by local codes.

Applicable for 25kW and 30kW units only.

Summary of content (11 pages)

PAGE 1
PROTECTOR® SERIES Standby Generators Liquid-Cooled Gaseous Engine Protector ® Series Protector® Series 1 of 11 Standby Power Rating INCLUDES: • Two-Line LCD Multilingual Digital Evolution™ Controller (English/Spanish/French/Portuguese) with external viewing window for easy indication of generator status and breaker position.
PAGE 2
Protector ® Series 2 of 11 25 • 30 • 36 • 45 • 60 kW application & engineering data GENERATOR SPECIFICATIONS ENGINE SPECIFICATIONS: 25 & 30 kW Type Synchronous Make Rotor Insulation Class H Model Stator Insulation Class H Cylinders Telephone Interference Factor (TIF) <50 Generac In-line 4 Displacement (Liters) 1.5 Alternator Output Leads 1-Phase 4 wire Bore (in/mm) 3.05/77.4 Alternator Output Leads 3-Phase 6 wire Stroke (in/mm) 3.13/79.
PAGE 3
operating data GENERATOR OUTPUT VOLTAGE/kW - 60 Hz RG025 RG030 RG036 RG045 RG060 kW LPG Amp LPG kW Nat. Gas Amp Nat. Gas CB Size (Both) 120/240 V, 1Ø, 1.0 pf 25 104 25 104 125 120/208 V, 3Ø, 0.8 pf 25 87 25 87 100 120/240 V, 3Ø, 0.8 pf 25 75 25 75 90 120/240 V, 1Ø, 1.0 pf 30 125 30 125 150 120/208 V, 3Ø, 0.8 pf 30 104 30 104 125 120/240 V, 3Ø, 0.8 pf 30 90 30 90 100 120/240 V, 1Ø, 1.0 pf 36 150 36 150 175 120/208 V, 3Ø, 0.
PAGE 4
Protector ® Series 25 • 30 • 36 • 45 • 60 kW ENGINE COOLING Air flow (inlet air including alternator and combustion air in cfm/cmm) 4 of 11 operating data System coolant capacity (gal/liters) Heat rejection to coolant (BTU per hr/MJ per hr) 25 kW 30 kW 36 kW 45 kW 60 kW 2490/70.5 2490/70.5 2725/77.2 2725/77.2 3280/92.9 2/7.6 2/7.6 2.5/9.5 2.5/9.5 2.5/9.5 112,000/118.2 135,000/142.4 193,000/203.6 193,000/203.6 270,000/284.
PAGE 5
Model # G006463-4 available accessories Product Description Mobile Link™ Generac's Mobile Link allows you to check the status of your generator from anywhere that you have access to an Internet connection from a PC or with any smart device. You will even be notified when a change in the generator’s status occurs via e-mail or text message. Note: Harness Adapter Kit required. Available in the U.S. only.
PAGE 6
LEFT SIDE VIEW RIGHT DOOR RIGHT DOOR OIL FILTER OIL DRAIN HOSE RADIATOR DRAIN HOSE RIGHT DOOR RIGHT DOOR OIL FILL CAP OIL DIP STICK ENCLOSURE MATERIAL ST ST AL AL 1.5L/25KW 1.5L/30KW 1.5L/25KW 1.5L/30KW 366 [807] 352 [777] 406 [895] 392 [865] WEIGHT GENSET ONLY KG [LBS] WEIGHT DATA LIFTING PROVISION (4 PLACES) SEE NOTES 5, 8 AND CENTER OF GRAVITY DIMENSIONS. 980 [38.
PAGE 7
45 [1.8] TYP 13.5 X 29.5 MOUNTING SLOTS 4X LEFT SIDE VIEW 1580 [62.2] 1345 [53.0] TOP VIEW 1380 [54.3] TYP MOUNTING SLOT CENTERS 50 [2.0] 226 [8.9] 100 [3.9] *STUB-UP AREA 9 [.4] 104.5 [4.11417] *STUB-UP AREA 51 [2.0] 27 [1.0] TYP 674 [26.5] REAR VIEW 776 [30.6] 723 [28.5] TYP MOUNTING SLOT CENTERS 735 [28.9] installation layout Drawing #0K8420-B (2 of 2) Protector ® Series REMOVABLE STUB-UP COVER 96 [3.8] * NOTE - STUB-UP AREA FOR HIGH AND LOW VOLTAGE CONNECTIONS.
PAGE 8
187 [7.4] RADIATOR/EXHAUST DISCHARGE AIR EXHAUST MUFFLER ENCLOSED WITHIN GENERATOR ENCLOSURE 443 [17.5] AL ST AL 2.4L 45KW ST 2.4L 45KW 2.4L 36KW 2.4L 36KW ENCLOSURE MATERIAL ENGINE/KW WEIGHT DATA 572 [1260] 596 [1313] 545 [1202] 569 [1255] 44 [98] 44 [98] 44 [98] 44 [98] WEIGHT SHIPPING SKID KG [LBS] 888 [35.0] OVERALL WIDTH REAR VIEW WEIGHT GENSET ONLY KG [LBS] 1170 [46.
PAGE 9
50 [2.0] TYP 13.5 X 29.5 MOUNTING SLOTS 4X LEFT SIDE VIEW 1950 [76.8] 1750 [68.9] TYP MOUNTING SLOT CENTERS TOP VIEW 1733 [68.2] 12 [.5] 217 [8.5] DIMENSIONS: MM [INCH] 25 [1.0] TYP 162 [6.4] *STUB-UP AREA 9 [.4] 162 [6.4] *STUB-UP AREA 850 [33.5] REAR VIEW 888 [35.0] 838 [33.0] TYP MOUNTING SLOT CENTERS 51 [2.0] 786 [30.9] installation layout Drawing #0K8636-B (2 of 2) Protector ® Series 116 [4.6] REMOVABLE STUB-UP COVER *NOTE - STUB-UP AREA FOR HIGH AND LOW VOLTAGE CONNECTIONS.
PAGE 10
RADIATOR/EXHAUST DISCHARGE AIR EXHAUST MUFFLER ENCLOSED WITHIN GENERATOR ENCLOSURE TOP VIEW LEFT SIDE ROOF TOP FAN BELT BATTERY LUBE OIL MAINTAINER SUPPLY TANK FILL CAP ENCLOSURE MATERIAL ST AL ENGINE/KW 2.4L 60KW 2.4L 60KW WEIGHT DATA 558 [1230] 582 [1283] 44 [98] 44 [98] WEIGHT SHIPPING SKID KG [LBS] REAR VIEW 888 [35.0] OVERALL WIDTH WEIGHT GENSET ONLY KG [LBS] 1170 [46.
PAGE 11
50 [2.0] TYP 13.5 X 29.5 MOUNTING SLOTS 4X LEFT SIDE VIEW 1950 [76.8] 1750 [68.9] TYP MOUNTING SLOT CENTERS TOP VIEW 1733 [68.2] 12 [.5] 217 [8.5] 162 [6.4] *STUB-UP AREA 25 [1.0] TYP 51 [2.0] DIMENSIONS: MM [INCH] 9 [.4] 162 [6.4] *STUB-UP AREA 786 [30.9] REAR VIEW 838 [33.0] TYP MOUNTING SLOT CENTERS 888 [35.0] 850 [33.5] installation layout Drawing #0L2090-B (2 of 2) ©2017 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice.