Specification

5 of 5
Model # Product Description
G006463-4 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from anywhere that you have ac-
cess to an Internet connection from a PC or with any smart device. You will even be notified via e-mail or
text message when a change in the generator's status occurs. Available in the U.S. only.
G005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet
cell battery for use with all air-cooled standby product (excluding PowerPact®).
G007101-0 Battery Pad Warmer
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls below 0°F.
(Not necessary for use with AGM-style batteries).
G007102-0 Oil Warmer
Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below
0°F.
G007103-0 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Evolution controllers
only in climates where heavy icing occurs.
G005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load
you may not need. Not compatible with 50 amp pre-wired switches.
G007027-0 Fascia Base Wrap Kit
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers a
sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting
holes located in the base.
G005703-0 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to protect from
future corrosion. The paint kit includes the necessary paint to properly maintain or touch-up a generator
enclosure.
G006482-0 - 9 kW
G006483-0 - 11 kW
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine
maintenance on a Generac automatic standby generator.
G006664-0
Wireless Remote Monitor
Completely wireless and battery powered, Generac's wireless remote monitor provides you with instant
status information without ever leaving the house. Not compatible with CorePower or EcoGen systems.
G006873-0
Smart Management Module
(50 Amps)
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to increase its
power management capabilities. It provides additional power management flexibility not found in any other
power management system.
®
9/11 kW available accessories
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2016 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No. 10000000191-D 10/25/16
®
dimensions & UPCs
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW
Model UPC
G007029-0 696471070293
G007030-0 696471070309
G007031-0 696471070316
G007032-0 696471070323
G007033-0 696471070330
9/11 kW