Cut Sheet

COLD WEATHER KITS

Optimize the performance of your standby generator in colder climates. Generac offers three options

for cold weather performance. A thermostatically controlled battery warmer and crankcase oil warmer

are available for areas where the temperature regularly falls below 0˚ degrees F. The battery warmer

is not needed if an optional AGM style battery is used. Also available is a breather warmer for harsh

climates were heavy icing can occur. Each kit is available separately.

Generator Maintenance

A scheduled maintenance program will ensure that your system is always in top operating condition and that your warranty requirements are

met. Please refer to the service chart for our recommended service and maintenance schedule.

Scheduled Maintenance Kits

Generac offers a comprehensive line of scheduled maintenance kits to ensure long life and top performance of your standby generator system.

Kits include: • Air Filter • Oil Filter • Spark Plug(s) • Oil Funnel • Reminder Sticker • Chamois (Kit contents may vary by model).

MISCELLANEOUS ACCESSORIES

Battery

Every standby generator requires a battery to start the system. Generac offers the recommended 26R, wet cell

battery for use with all air-cooled 8-22kW product.

Base Plug Kits

The base plug kits offer an easy way to ll the lifting holes in the liquid-cooled generator base. Create a

streamlined look and protect your generator from weather and animal-related damage.

Ground/Neutral Kit

Contractors and dealers installing pre-wired transfer switches with Generac home standby generators will

benet from Generac’s new ground/neutral kit. In the neutral application, the kit provides exibility for installers

if a customer only wants or needs single-pole breakers backed up. Additionally, when used in the ground

conguration, the kit eliminates the need for an additional gang box if wire nuts are not allowed in the main

electrical panel by allowing installers to land all of the main branch wiring directly into the transfer switch.

Paint Kits

The enclosure is the generator’s rst line of defense against the elements, and it’s important to keep it in good

condition. Touch up scratches and other damage to protect from future corrosion. Kits include the necessary

paint to properly maintain or touch up a generator enclosure. Please check with your sales representative to verify

proper color coordination.

Air-cooled Generator Transport Cart

Moving a 400 lb generator can be hard work. The Generator Transport Cart will assist with moving the generator

from the truck to the installation site. Allows for a single person to easily maneuver any air-cooled product to the

desired location.

• Works with all Generac, Guardian Series air-cooled models. (Excludes CorePower, PowerPact).

Fascia for Air-cooled Units

Complement the contoured enclosure with a fascia base wrap that snaps together around the bottom of the

generator. Fascia continues the sleek, contoured appearance as well as offering protection from rodents and

insects by covering the lifting holes located in the base. Standard on 22 kW air-cooled model. These are available

in gray and bisque. (Excludes CorePower, PowerPact).

Extended Warranty Options

Protect your investment, longer than ever before with the added coverage of a 5, 7 or 10 year extended warranty.

5 7 10

YEAR