Replacement Part List
6 of 6
®
Model # Product Description
G005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet cell
battery for use with all air-cooled standby product (excluding PowerPact
®
).
G007101-0 Battery Pad Warmer
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls below 0 °F (-18
°C). (Not necessary for use with AGM-style batteries)
.
G007102-0 Oil Warmer
Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below 0 °F (-18
°C).
G007103-1 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Evolution controllers only in
climates where heavy icing occurs.
G005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load you
may not need. Not compatible with 50 amp pre-wired switches.
G007027-0 - Bisque Fascia Base Wrap Kit
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers a sleek,
contoured appearance as well as offering protection from rodents and insects by covering the lifting holes lo-
cated in the base.
G005703-0 - Bisque Touch-Up Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future
corrosion. The paint kit includes the necessary paint to correctly maintain or touch up a generator enclosure.
G006482-0 – 10 kW
G007216-0 – 13 / 16 kW
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the items necessary to perform complete routine maintenance
on a Generac automatic standby generator (oil not included).
G007005-0 Wi-Fi LP Fuel Level Monitor
The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the connected LP fuel tank. Monitoring
the LP tank's fuel level is an important step in verifying the generator is ready to run during an unexpected power
failure. Status alerts are available through a free application to notify users when the LP tank is in need of a refill.
G007000-0 (50 amps)
G007006-0 (100 amps)
Smart Management Module
Smart Management Modules (SMM) are used to optimize the performance of a standby generator. It manages
large electrical loads upon startup and sheds them to aid in recovery when overloaded. In many cases, using
SMM’s can reduce the overall size and cost of the system.
G007169-0
Mobile Link™ 4G LTE Cellular
Accessory
The Mobile Link 4G LTE Cellular Accessory allows users to monitor the status of the generator from anywhere
in the world, using a smartphone, tablet, or PC. Easily access information such as the current operating status
and maintenance alerts. Users can connect an account with an authorized service dealer for fast, friendly, and
proactive service. With Mobile Link, users are taken care of before the next power outage.
Dimensions & UPCs
Dimensions shown are approximate. See installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in
]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW
Model UPC
G007171-0 696471074680
G007172-0 696471074673
G007173-0 696471076400
G007174-0 696471077100
G007175-0 696471077117
G007176-0 696471076417
G007177-0 696471077124
G007178-0 696471077131
10/13/16 kW
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2019 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No. 10000033190 Rev. A 07/26/19
®
Available Accessories10/13/16 kW