Installation Guide

Accessories
Installation Guidelines for 60 Hz Air-Cooled Generators 47
Section 10: Accessories
Performance enhancing accessories are available for air-cooled generators.
NOTE: Contact an IASD or visit www.generac.com for additional information on accessories and extended warran-
ties.
Accessory Description
Cold Weather Accessories*—
• Battery Pad Warmer
• Oil Warmer
• Breather Warmer
* each sold separately
• Recommended in areas where temperatures fall below 0 °F (-18 °C).
(Not necessary for use with AGM-style batteries)
• Recommended in areas where temperatures fall below 0 °F (-18 °C).
• Recommended in areas where heavy icing occurs.
Scheduled Maintenance Kit Provides all items necessary to perform complete routine maintenance on a
generator, along with oil recommendations (oil not included).
Fascia Base Wrap The fascia base wrap snaps together around the bottom of the new air-cooled
generators. This offers a sleek, contoured appearance as well as offering pro-
tection from rodents and insects by covering lifting holes located in the base.
Requires use of the mounting pad shipped with the generator.
Touch-Up Paint Kit If the generator enclosure is scratched or damaged, it is important to touch-up
the paint to protect from future corrosion. The touch-up paint kit includes the
necessary paint to correctly maintain or touch-up a generator enclosure.
Extended Warranty Coverage Extend generator warranty coverage by purchasing extended warranty cover-
age. Covers both parts and labor. Extended coverage can be purchased within
12 months of end-users purchase date.
This extended coverage is applicable to registered units, and end-user proof of
purchase must be available upon request.
Available for Generac
®
and Guardian
®
products.
Not available for Corepower™, PowerPact
®
, or EcoGen™ products, or all
international purchases.
Wi-Fi LP Tank Fuel Level Monitor The Wi-Fi enabled LP tank fuel level monitor provides constant monitoring of
the connected LP fuel tank. Monitoring the LP tank's fuel level is an important
step in verifying the generator is ready to run during an unexpected power fail-
ure. Status alerts are available through a free application to notify users when
the LP tank needs a refill.
Mobile Link
®
Cellular Accessories Mobile Link family of Cellular Accessories allow users to monitor generator
status from anywhere in the world, using a smartphone, tablet, or PC. Easily
access information such as the current operating status and maintenance
alerts. Users can connect an account with an authorized service dealer for
fast, friendly, and proactive service. With Mobile Link, users are taken care of
before the next power outage.
Smart Management Module
(50 and 100 amps)
Smart Management Modules (SMM’s) are used to optimize the performance of
a standby generator. They manage large electrical loads upon startup, and
shed them to aid in recovery when overloaded. In many cases, using SMM’s
can reduce the overall size and cost of the system.
Ultrasonic Cleaning Solution 1 gal (3.8 L) of ultra concentrated cleaning solution for metal and plastic sur-
faces. Makes 6 gal (22.7 L) of cleaning solution.
All Surface Protectant All surface protectant for vinyl, rubber, and plastics. Creates a barrier to seal
and protect surfaces from water and UV rays while renewing the look of the
surface.