Spec Sheet

Generac Mobile Products, LLC l 800-926-9768 l 920-361-4442 l www.generacmobileproducts.com
Page 1 of 4
MLT4060MV
ENGINE SYSTEM
Mitsubishi® L3E
Diesel fueled
EPA Tier 4 Final
3 cylinder
0.95 L displacement
Power @ 1,800 rpm HP (kW):
Prime: 11.3 (8.4)
Standby: 12.2 (9.1)
Air filter: Dry type cartridge
Fuel System
Tank usable capacity: 56.4 gal (213.5 L)
Fuel consumption – gph (Lph):
100% load: 0.59 (2.2)*
Fill port diameter: 3.5 in (88.9 mm)
Fuel filter: replaceable element
Cooling System
Liquid cooled
Lubrication System
Oil filter: Full flow, spin-on type
1,000-hr service interval**
*Data based on engine manufacturer and field test data after 100-hr engine break-in period. Actual results may vary, according to factors
such as age and maintenance of equipment, environmental conditions, and fuel density. For fuel and maintenance recommendations, see
owner’s manual.
**To achieve maximum service interval, replace oil filter after 50-hr break-in period. See owner’s manual for oil filter model number.
GENERATOR
60 Hz engine/generator
Marathon Electric® brushless
Up to 6 kW output
120/240 VAC, 50/25 A
± 6% capacitor voltage regulation
CONTROLS
Engraved, aluminum punched and anodized control panel
Key-activated switch with 4 positions (GLOW PLUG, OFF, RUN, START)
Independent light switches
Digital hour meter
Automatic shutdown for low oil pressure and high coolant temperature
SPECIFICATIONS
METAL HALIDE LIGHT TOWER
Picture shown may not reflect actual configuration.

Summary of content (4 pages)