Spec Sheet

ManualsBrandsGenerac ManualsLight TowerMLT4080KV-STD - 8kW Towable Diesel Vertical Mast Light Tower w/ Kubota Engine & Electric Winch

Generac Mobile Products, LLC l 800-926-9768 l 920-361-4442 l www.generacmobileproducts.com

Page 1 of 4

MLT4080KV

ENGINE SYSTEM

 Kubota® D1105-E3BG

 Diesel fueled

 EPA Tier 4

 3 cylinder

 1.12 L displacement

 Liquid cooled

 Power @ 1,800 rpm – HP (kW):

 Prime: 13.5 (10.1)

 Standby: 15.4 (11.5)

Fuel System

 Polyethylene tank – 56.4 gal (213.5 L) usable fuel volume

 Fuel consumption – gal/hr (L/hr):

 100% load: 0.81 (3.08)*

 Exterior fill port diameter: 3.5 in (88.9 mm)

 Fuel filter with replaceable element

Cooling System

 Air filter: Dry type cartridge

 Cooling system capable of operating at 120°F (49°C) ambient

Lubrication System

 Oil filter: Full flow, spin-on type

 1,000-hr service interval*

*Results based on engine manufacturer and field test data after 100-hour engine break-in period and may vary based on factors including age

and maintenance of equipment, environmental conditions and fuel density. Consult the Owner's Manual for fuel and maintenance

recommendations.

GENERATOR

 60 Hz engine/generator

 Marathon Electric® brushless

 Up to 8 kW output

 120/240 VAC, 50/25 A

 ± 6% capacitor voltage regulation

CONTROLS

 Engraved, aluminum punched and anodized control panel

 4-position key activated switch (off, run, glow, start)

 Digital hour meter

 Automatic low oil/high temperature shutdown system

SPECIFICATIONS

METAL HALIDE LIGHT TOWER

Summary of content (4 pages)

PAGE 1
MLT4080KV METAL HALIDE LIGHT TOWER SPECIFICATIONS ENGINE SYSTEM        Kubota® D1105-E3BG Diesel fueled EPA Tier 4 3 cylinder 1.12 L displacement Liquid cooled Power @ 1,800 rpm – HP (kW):  Prime: 13.5 (10.1)  Standby: 15.4 (11.5) Fuel System  Polyethylene tank – 56.4 gal (213.5 L) usable fuel volume  Fuel consumption – gal/hr (L/hr):  100% load: 0.81 (3.08)*  Exterior fill port diameter: 3.5 in (88.
PAGE 2
MLT4080KV METAL HALIDE LIGHT TOWER SPECIFICATIONS FLOODLIGHTS  Four [4] 1,100 watt metal halide  Lm/bare bulb: 132,000  Lm/fixture: 70,356  Total bare bulb lm: 528,000  Total fixture lm: 281,424  Efficiency: 120 LPW  Coverage: @ 0.
PAGE 3
MLT4080KV METAL HALIDE LIGHT TOWER SPECIFICATIONS     7800 lb. (3538 kg) safety chains with spring loaded safety hooks 2 in. (50.8 mm) ball hitch Single wall polyethylene fenders DOT approved tail, side, brake, and directional lights  Recessed rear lights  2200 lb. (997.90 kg) leaf spring axle  ST175/80D13 – 6 ply  56 in. (1422.4 mm) axle span WEIGHT  Dry weight: 1785 lbs. (810 kg)  Operating weight: 2188 lbs. (992 kg) DIMENSIONS A 115 in (2.92 m) B 107 in (2.71 m) C 25 ft (7.
PAGE 4
MLT4080KV METAL HALIDE LIGHT TOWER SPECIFICATIONS OPTIONS  Digital Power Zone Controller  Cold weather package options  Canadian Package (CAN)  60/40 coolant  Radiator hose heater  Heated fuel filter  775CCA AGM sealed battery  Liquid containment  Additional options available. Please contact a sales representative or the factory for current options. WARRANTY  1 Year / Unlimited Hours  2 Years / 2000 Hours CERTIFICATIONS CSA Certified FOR MORE INFORMATION Owner’s manual is available at www.