Product Manual
Table Of Contents
- Introduction
- Table of Contents
- Safety Notes
- Operating Safety
- Engine Safety
- Service Safety
- Towing Safety
- Reporting Trailer Safety Defects
- Safety Symbol Summary
- Specifications - MLT4150MV, MLT4200IV
- Specifications - MLT4200IVCAN
- Unit Dimensions
- Unit Serial Number Locations
- Component Locations
- Light Tower Set Up
- Raising the Mast
- Main Control Panel
- Prestart Checklist
- Emergency Stop Switch
- Starting the Unit
- Automatic Shutdown
- Light Operation
- Voltage Regulation
- Derating for Altitude
- Wet Stacking
- Receptacle Panel
- Shutting Down the Unit
- Lowering the Mast
- Removing the Lights for Transportation
- Towing the Unit
- Lifting the Unit
- General Maintenance
- Basic Maintenance Schedule - Mitsubishi Engine
- Basic Maintenance Schedule - Isuzu Engine
- Winch Use, Operation & Maintenance
- Jack Maintenance
- Trailer Wheel Bearings
- Lower Radiator Hose Heater Option - Use and Maintenance
- Troubleshooting the Lights
- Mast Light Connections
- AC Wiring Diagram
- AC Wiring Diagram - Receptacle Panel
- AC Wiring Diagram - Receptacle Panel Options (1 of 2)
- AC Wiring Diagram - Receptacle Panel Options (2 of 2)
- DC Wiring Diagram
- DC Wiring Diagram - Electric Winch
- DC Wiring Diagrams for Optional Equipment
- Trailer Lights Wiring Diagram
- Service Log
8
SAFETY SYMBOL SUMMARY
This equipment has been supplied with numerous safety and operating decals. These decals provide important
operating instructions and warn of dangers and hazards. Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal placement and part numbers can be found in the parts manual. Below is
a summary of the intended meanings for the symbols used on the decals.
UV
Hot surface(s) nearby.
Fire/explosion hazard; keep
open flames away from unit.
Read and understand the
supplied operator’s manual
before operating unit.
Ultraviolet radiation hazard;
operate only with lens intact.
Use clean diesel fuel only.
Unit electrical ground.
Anchor/tie down point.
Lift here only.
Asphyxiation hazard; operate
in well ventilated area.
Dangerous voltage may be
present.
Crush hazard; keep body parts
clear of this area.
Burn/scald hazard;
pressurized steam.
Fan hazard; keep body parts
clear of this area.
Forklift here only.
Belt/entanglement hazard; keep
body parts clear of this area.
Safety alert symbol; used to
alert you to potential personal
injury hazards.
Stop engine before fueling.
00198