Product Manual A

General Information
Owner’s Manual for MLT6SMD Light Tower 19
Control Panel Features and Functions
(A) DC Circuit Breaker
Resets the DC electrical circuit that powers the control
panel and engine components.
(B) 120VAC outlet breaker
Powers the 120V/20A GFCI outlet.
(C) Mast light circuit breakers (4)
Individual circuit breakers for the LED drivers and lights.
(D) Mast circuit breaker
Resets the electrical circuit for the electric winch (if
equipped).
(E) PowerZone
®
–DLA
This controller serves as the main control unit for the
Light Tower. See the following pages for details.
(F) 120V/20A GFCI outlet
Customer convenience outlet for use in connecting
auxiliary equipment such as fans, pumps, drills. Includes
a Ground Fault Circuit Interrupter (GFCI) test and reset
button.
(G) 240VAC outlet
Customer convenience outlet for use in connecting
auxiliary equipment such as fans, pumps, drills.
(H) 240VAC outlet breaker
• Enables high speed engine operation for 60Hz
export power
• Circuit protection for 30A twist lock outlet; circuit
feed for 20A outlet breaker
(J) Automatic Load Sense switch
Automatic Load Sense works in tandem with the
ECOSpeed engine to adjust engine operating speed
according to lighting and export power requirements. The
240VAC outlet breaker (H) must be ON to enable
Automatic Load Sense.
• Turning Automatic Load Sense switch ON
enables Automatic Load Sense—the default
setting for normal export power operation.
• Turning Automatic Load Sense switch OFF
disables Automatic Load Sense and allows the
engine to run at high speed when the 240VAC
outlet breaker (H) is ON. Use this setting when
connecting equipment that requires a higher
starting amperage, such as air conditioners, air
compressors, or submersible pumps.
(K) Mast switch (electric winch units only)
Raises and lowers the mast on units equipped with an
electric winch.
(L) Control power switch
Enables power supply to the PowerZone–DLA.
ECOSpeed™ Engine
This unit is equipped with an ECOSpeed engine that runs
at variable speeds depending on the applied operational
load. Operating temperature remains constant regardless
of engine speed or applied loads.
• The engine runs at low speed when the LED lights
are operating and the 240VAC/30A outlet breaker
is OFF. The lower speed conserves fuel, reduces
emissions and sound output, and extends total run
time.
• The engine runs at high speed when the LED lights
are turned on and the 240VAC/30A outlet breaker
is ON. The higher speed maximizes export of clean
60 Hz power to the convenience outlets.
Refer to Operation for more information.