Product Manual

Owner’s Manual for Mobile Light Tower 33
Operation
5. See Figure 3-41. Switch controller power to OFF
(O).
Figure 3-41. Controller Power OFF (O)
6. See Figure 3-42. Install 240 V, four-terminal cord
to unit power inlet port.
Figure 3-42. Utility Cord Installation to Unit
7. Install 240 V, four-terminal cord to utility power
source.
8. See Figure 3-43. Switch the flex switch (if
equipped) to position 1.
Figure 3-43. Flex Switch—Position 1
9. See Figure 3-44. Switch controller power to ON (I).
Figure 3-44. Controller Power ON
10. See Figure 3-45. On controller, activate utility
mode by pushing the Utility Mode button.
Figure 3-45. Utility Mode Button
NOTE: When utility mode is activated, the LED (A)
switches on.
11. See Figure 3-46. Switch main circuit breaker to
ON (I).
Figure 3-46. Main AC Circuit Breaker ON (I)
12. See Figure 3-47. Switch lights ON (I) by pressing
the light ON-OFF buttons.
Figure 3-47. Light Fixture ON-OFF Buttons
13. Begin use of the 120 V convenience receptacles.
See Customer Convenience Receptacles (If
Equipped).
14. Close unit hood.
Stopping Utility Mode (If
Equipped)—Analog Controls
1. Open unit hood.
2. Remove all loads from receptacles. See
Removing Loads from Receptacles (If
Equipped).
3. See Figure 3-48. Switch lights to OFF (O).
Figure 3-48. Lights OFF (O)
010596
010597
010598
010588
010581
010589
MAIN AC
CIRCUIT
BREAKER
Light 1
Light 2
Light 4
Light 3
010579
010586