Replacement Part List

Owner’s Manual for Power Grader 3
General Information and Setup
Section 2: General Information and Setup
Table 1 – Specifications
A complete specification sheet is included in the documentation provided with the unit at the time of purchase. For
additional copies, contact Generac Customer Service at 1-888-436-3722 (1-888-GENERAC), or www.generac.com.
0060100
A Tow Hitch
B Pitch Adjust Assembly
C Height Adjust Cables
D Actuator
E Fuse
F Battery
G Actuator Cover
H Mold Bar
I Axle and Wheel Assembly
J Tooth Bar
K Actuator Wire Harness
L Tow Ba r
M Control Box Wire Harness
N Height Adjust Control Box
L
K
J
I
H
G
C
B
A
D
M
N
E
Figure 2-1. Features and Controls
F
Teeth 14 ea.
Material
90/10 tungsten/carbide tipped 4142
hardened alloy steel
Distance Between
Tee th
4 in (10.16 cm)
Mold Board Cold rolled steel .25 in (6.35 mm)
Reversible
Grading or grooming blade types
Adjustable Angle
50° for aggressive cutting
90° for light dragging and mixing
105° for light material and grooming
Frame
12 gauge side plates, 10 gauge rails,
2 in (5.08 cm) square tow bar
Actuator
Electric w/ 4 in (10.16 cm) stroke
Teeth Positions
4.5 in (11.43 cm) above surface to
.563 in (1.49 cm) below
Wheels
11 in (27.94 cm) diameter x 4 in
(10.16 cm) wide x 5 in (12.7 cm) rim
Hitch
Dual hitch system for pin or ball
hitches
Wheel Capacity
(Blocks)
80 lbs (36.29 kg) 2 standard 16 in
(40.64 cm) x 8 in 20.32 cm) x8 in
(20.32 cm) cinder blocks
Remote Control
Rocker switch tethered control
Battery 12 volt 9Ah battery with charger
Drag Screen Optional drag screen
Minimum Tow
Vehicle HP
19hp, 500 lb (226.80 kg) tractor, or
500cc 4WD ATV
Dimensions
76 in (193 cm) L X 49 in (124.46 cm)
W X 17 in (43.18 cm) H
Weight (lb/kg)
175 lbs (79.38 kg)