Specification

1 of 2
*Built in the USA using domestic
and foreign parts
Limited Circuit
Automatic Transfer Switch
Limited Circuit Switch
®
Limited Circuit
Switch
100 Amp, Single Phase,
16 Circuit, NEMA 3R
DESCRIPTION
This Generac automatic transfer switch is designed to operate with air-cooled generators. This transfer switch has an integrated load
center to allow for essential circuit back up. It is especially useful where the main service is large, and only a portion of the building
will be served by the generator, or when the main electrical breaker panel is located outdoors. It comes standard with a 16 circuit
breaker panel that can be populated with the appropriate sized breakers needed for any application. It is UL/CUL listed and suitable
for use in optional standby systems (NEC702). This switch is listed for use with Siemens, Eaton, or Square D one inch breakers.
The bottom four breaker spaces will accommodate tandem breakers, making the panel expandable to 24 circuits.
STANDARD FEATURES
This automatic transfer switch is housed in an all weather, aluminum NEMA 3R enclosure with electrostatically applied and baked
powder paint. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The controller on the
generator handles all of the timing, sensing and exercise functions. Multi listed for use with 1" standard, tandem, GFCI and AFCI
breakers from Siemens, Eaton and Square D for the most flexible and cost effective install.
CONTACTOR RATING
The automatic transfer switch contactor is rated at 25O VAC and is available in a single phase configuration only.

Summary of content (2 pages)