Spec Sheet

1 of 2

Non-Service Rated

Automatic Transfer Switches

600-800 Amps

600 - 800 Amps, 1 and 3-phase

DESCRIPTION

Generac 600-800 amp non-service rated switches are compatible with the full 22-150kW line of liquid-cooled generators. The

switches are open transition and are available in 120/240 1ø, 120/208 3ø, 120/240 3ø, and 277/480 3ø.

STANDARD FEATURES

600-800 amp non-service rated transfer switches are housed in a rugged steel NEMA/UL Type 3R enclosure, with electrostatically

applied and baked powder paint. The Heavy Duty Generac Contactor is a UL recognized device, designed for years of service. The

controller at the generator handles all the timing, sensing, exercising functions, and transfer commands.

DPM TECHNOLOGY (single-phase switches only)

Through the use of Digital Power Management technology (DPM), each of these switches has the capability to truly manage two

air conditioning loads with no additional hardware. When used in tandem with the individual Power Management Modules (PMM),

up to four more additional loads can be intelligently managed.

PAGE 1
600-800 Amps Non-Service Rated Automatic Transfer Switches 600-800 Amps ® 1 of 2 600 - 800 Amps, 1 and 3-phase DESCRIPTION Generac 600-800 amp non-service rated switches are compatible with the full 22-150kW line of liquid-cooled generators. The switches are open transition and are available in 120/240 1ø, 120/208 3ø, 120/240 3ø, and 277/480 3ø.
PAGE 2
600-800 Amps 2 of 2 ® 600-800 Amps Non-Service Rated Transfer Switches Functions All timing and sensing functions originate in the generator controller Utility voltage drop-out.......................................................................................................................................................................................................................<60% Timer to generator start........................................................................................