Spec Sheet

ManualsBrandsGenerac ManualsGeneratorsPWRview 200 Amp Single-Phase NEMA-3R Automatic Transfer Switch

Description

The Generac PWRview Automatic Transfer Switch integrates the PWRview monitor to provide real-time energy consumption data that can help lower a

home’s electricity bill. Through the convenient mobile app, a homeowner can access their energy usage and alert information while under utility power or

generator power. The PWRview energy monitor is a simple to use and low cost tool that helps save money over the life of the generator.

The 200 amp, open transition transfer switch is compatible with single-phase generators having either an Evolution™ or Nexus™ Controller.

Standard Features

Service Rated Generac Automatic Transfer Switches are housed in an aluminum NEMA Type 3R enclosure, with electrostatically applied and baked powder

paint. The Heavy Duty Generac Contactor is an ETL recognized device, designed for years of service. The controller at the generator handles all the timing,

sensing, exercising functions, and transfer commands. The integrated PWRview monitor provides real-time energy usage data through the PWRview app.

The PWRview monitor is covered by a 1 year limited warranty, while the remaining transfer switch components carry a 5 year limited warranty.

Load Management Technology

Through the use of the integrated Smart A/C Module (SACM), these switches have the capability to manage up to four individual HVAC (24 VAC controlled)

loads with no additional hardware. When used in tandem with external Smart Management Modules (SMM), a total of eight more loads can be managed,

providing the most installation efficient power management options available.

*Assembled in the USA using

domestic and foreign parts

200 Amps, Single Phase

Automatic Transfer Switches

1 of 2

PWRview™ Automatic Transfer Switch

Automatic Transfer

Switches

Summary of content (2 pages)

PAGE 1
Automatic Transfer Switches PWRview™ Automatic Transfer Switch Automatic Transfer Switches ® 1 of 2 1o 200 Amps, Single Phase *Assembled in the USA using domestic and foreign parts Description The Generac PWRview Automatic Transfer Switch integrates the PWRview monitor to provide real-time energy consumption data that can help lower a home’s electricity bill.
PAGE 2
Automatic Transfer Switches 2 of 2 ® PWRview Automatic Transfer Switch 200 Amps, Single Phase Functions All timing and sensing functions originate in the generator controller. Utility voltage dropout ...........................................................................................................................................................................................<65% Time to generator start .......................................................................