Spec Sheet

ManualsBrandsGenerac ManualsElectricalRXGW20SHA3- 200 amp Auto Transfer Switch with 20-40 Circuit Load Center

1 of 2

200 Amps, Single Phase

Description

Generac Transfer Switches are designed for use with single phase generators that utilize an Evolution™ or Nexus™ Controller. The 200 amp open transition

switch is a single phase service entrance rated configuration. An integrated load center with pass through lugs allows branch circuit protection for outbuild-

ings, while also feeding a home’s main distribution panel.

Standard Features

Service Rated Generac Automatic Transfer Switches are housed in an aluminum Type 3R enclosure, with electrostatically applied and baked powder paint.

The Heavy Duty Generac Contactor is an ETL recognized device, designed for years of service. The controller at the generator handles all the timing,

sensing, exercising functions, and transfer commands. The integrated 20 space load center accepts 1 in (25.4 mm) standard, GFCI, AFCI, or tandem circuit

breakers from Siemens, Murray, Eaton, and Square D for the most flexible and cost effective install. Utilizing tandem breakers, the load center can be

equipped to support up to 40 individual circuits. All switches are covered by a 5 year limited warranty.

Load Management Technology

Through the use of the integrated Smart A/C Module (SACM), these switches have the capability to manage up to four individual HVAC (24 VAC controlled)

loads with no additional hardware. When used in tandem with external Smart Management Modules (SMM), a total of eight more loads can be managed,

providing the most installation efficient power management options available.

Service Rated

Automatic Smart Transfer Switch

with 20–40 Circuit Load Center

Automatic Transfer

Switches

Automatic Transfer Switches

*Assembled in the USA using

domestic and foreign parts

Summary of content (2 pages)

PAGE 1
Automatic Transfer Switches Service Rated Automatic Smart Transfer Switch with 20–40 Circuit Load Center Automatic Transfer Switches ® 1 of 2 1o 200 Amps, Single Phase *Assembled in the USA using domestic and foreign parts Description Generac Transfer Switches are designed for use with single phase generators that utilize an Evolution™ or Nexus™ Controller. The 200 amp open transition switch is a single phase service entrance rated configuration.
PAGE 2
Automatic Transfer Switches 2 of 2 ® 200 Amps, Single Phase Automatic Smart Transfer Switches Functions All timing and sensing functions originate in the generator controller. Utility voltage dropout ...........................................................................................................................................................................................<65% Time to generator start .......................................................................