Manualshelf

Spec Sheet

ManualsBrandsGenerac ManualsGenerator Accessories150-Amp Service Rated 120/240-Volt Single Phase NEMA 3R Smart Transfer Switch
123
1 of 3
®
Service and Non-Service Rated
Automatic Transfer Switches
Automatic
Transfer Switches
Automatic Transfer Switches
®
Description
This series of Generac Automatic Transfer Switches is designed for use with single phase generators that utilize an Evolution™ or Nexus™ Controller. The
100 and 200 Amp open transition switches are available in single phase in both service equipment rated and non-service equipment rated configurations.
The 150 Amp open transition switch is only available in a service rated equipment configuration.
Standard Features
Service rated (RXSW) Generac Automatic Transfer Switches are housed in an aluminum NEMA Type 3R enclosure*, with electrostatically applied and
baked powder paint. The Heavy Duty Generac Contactor is an ETL recognized device, designed for years of service. The controller at the generator handles
all the timing, sensing, exercising functions, and transfer commands. All switches are covered by a five year limited warranty.
* Non-service rated (RXSC) switches are housed in a steel enclosure.
Load Management Technology
Through the use of the integrated Smart A/C Module (SACM), these switches have the capability to manage up to four individual HVAC (24 VAC
controlled) loads with no additional hardware. When used in tandem with external Smart Management Modules, a total of eight more loads can be
managed, providing the most installation efficient power management options available.
Models: RXSC100A3
RXSW100A3
RXSW150A3
RXSC200A3
RXSW200A3

Summary of content (3 pages)