Spec Sheet

1 of 2

*Built in the USA using domestic

and foreign parts

Service and non-Service rated

Automatic Smart Transfer Switches

Automatic Transfer Switches

Automatic

Transfer Switches

100 - 400 Amps, Single Phase

Description

Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution™ or Nexus™

Controller. The 100, 200, and 400 amp open transition switches are available in single phase in both service equipment rated and

non-service equipment rated configurations. The 150 and 300 amp open transition switches are only available in a service rated

equipment configuration.

Standard Features

Service rated (RXSW) Generac Automatic Transfer Switches are housed in an aluminum NEMA/UL Type 3R enclosure*, with

electrostatically applied and baked powder paint. The Heavy Duty Generac Contactor is a UL recognized device, designed for

years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. All

switches are covered by a 5 year limited warranty.

* Non-service rated (RXSC) switches are housed in a steel enclosure.

DPM Technology

Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC

controlled) loads with no additional hardware. When used in tandem with Smart Management Modules, up to 8 more loads can be

managed as well, providing the most installation efficient power management options available.

*CUL only applies to non-service rated switches

ISO

9001:

2008

PAGE 1
Automatic Transfer Switches Service and non-Service rated Automatic Smart Transfer Switches Automatic Transfer Switches ® 1 of 2 100 - 400 Amps, Single Phase *Built in the USA using domestic and foreign parts *CUL only applies to non-service rated switches Description Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution™ or Nexus™ Controller.
PAGE 2
Automatic Transfer Switches 2 of 2 ® 100-400 Amps, Single Phase Automatic Smart Transfer Switches Functions All timing and sensing functions originate in the generator controller Utility voltage drop-out.......................................................................................................................................................................................................................<65% Timer to generator start.............................................................