Product Manual

Owner’s Manual for Tow-Behind Field and Brush Mower 11

General Information and Setup

UTV Extension

1. See Figure 2-19. Pull existing wire harness con-

nector (A) from blade engage control box (B).

Figure 2-19. UTV Extension

Plug UTV extension onto the wire harness.

Plug blade engage control box onto UTV extension.

NOTE: Don’t force the connections. One end of the UTV

extension will only fit into the control box and the other

end will only fit into the existing wire harness.

4. Secure blade extension control box to tow vehicle.

See Attaching Blade Engage and Disengage

Remote Control.

Blade Clutch Burnishing

The blade clutch must be burnished before initial use to

ensure optimum engaging and braking action.

NOTE: The machine must be fully assembled and set up

before performing the burnishing procedure.

1. Start the engine and set the machine to half throt-

tle. See Starting Unit.

2. Engage blade clutch for two seconds, disengage

and let cool down for 10 seconds.

3. Repeat step 2 for 50 cycles.

WARNING

(000415)

Accidental start-up. Before servicing or detangling, shut

down unit, allow to cool, remove keys, and disconnect spark

plug wire(s). Failure to do so could result in death, serious

injury, or equipment damage.

006208